Browsing by Subject "Absorption cross sections"
Now showing 1 - 6 of 6
Results Per Page
Sort Options
Item Open Access Alloyed heterostructures of CdSexS1-x nanoplatelets with highly tunable optical gain performance(American Chemical Society, 2017) Kelestemur Y.; Dede, D.; Gungor K.; Usanmaz, C. F.; Erdem, O.; Demir, Hilmi VolkanHere, we designed and synthesized alloyed heterostructures of CdSexS1-x nanoplatelets (NPLs) using CdS coating in the lateral and vertical directions for the achievement of highly tunable optical gain performance. By using homogeneously alloyed CdSexS1-x core NPLs as a seed, we prepared CdSexS1-x/CdS core/crown NPLs, where CdS crown region is extended only in the lateral direction. With the sidewall passivation around inner CdSexS1-x cores, we achieved enhanced photoluminescence quantum yield (PL-QY) (reaching 60%), together with increased absorption cross-section and improved stability without changing the emission spectrum of CdSexS1-x alloyed core NPLs. In addition, we further extended the spectral tunability of these solution-processed NPLs with the synthesis of CdSexS1-x/CdS core/shell NPLs. Depending on the sulfur composition of the CdSexS1-x core and thickness of the CdS shell, CdSexS1-x/CdS core/shell NPLs possessed highly tunable emission characteristics within the spectral range of 560-650 nm. Finally, we studied the optical gain performances of different heterostructures of CdSexS1-x alloyed NPLs offering great advantages, including reduced reabsorption and spectrally tunable optical gain range. Despite their decreased PL-QY and reduced absorption cross-section upon increasing the sulfur composition, CdSexS1-x based NPLs exhibit highly tunable amplified spontaneous emission performance together with low gain thresholds down to ∼53 μJ/cm2.Item Open Access Experimental determination of the asbsorption cross-section and molar extinction coefficient of colloidal CdSe nanoplatelets(American Chemical Society, 2015) Yeltik A.; Delikanlı, S.; Olutas M.; Keleştemur, Y.; Güzeltürk, B.; Demir, Hilmi VolkanThere has been a strong interest in solution-processed two-dimensional nanomaterials because of their great potential in optoelectronics. Here, the absorption cross-section and molar extinction coefficient of four and five monolayer thick colloidal CdSe nanoplatelets (NPLs) having various lateral sizes are reported. The absorption cross-section of these NPLs and their corresponding molar extinction coefficients are found to strongly depend on the lateral area. An excellent agreement is observed between the experimental results and the calculated values based on the small-particle light absorption model. With these optical properties, NPLs hold great promise for optoelectronic applications. © 2015 American Chemical Society.Item Open Access Focusing of THz waves with a microsize parabolic reflector made of graphene in the free space(Springer International Publishing, 2017) Oguzer T.; Altintas, A.; Nosich A.I.Background: The scattering of H- and E-polarized plane waves by a two-dimensional (2-D) parabolic reflector made of graphene and placed in the free space is studied numerically. Methods: To obtain accurate results we use the Method of Analytical Regularization. Results: The total scattering cross-section and the absorption cross-section are computed, together with the field magnitude in the geometrical focus of reflector. The surface plasmon resonances are observed in the H-case. The focusing ability of the reflector is studied in dependence of graphene’s chemical potential, frequency, and reflector’s depth. Conclusions: It is found that there exists an optimal range of frequencies where the focusing ability reaches maximum values. The reason is the quick degradation of graphene’s surface conductivity with frequency. © 2017, The Author(s).Item Open Access High-efficiency optical gain in type-II semiconductor nanocrystals of alloyed colloidal quantum wells(American Chemical Society, 2017) Guzelturk, B.; Kelestemur Y.; Olutas M.; Li, Q.; Lian, T.; Demir, Hilmi VolkanColloidal nanocrystals having controlled size, tailored shape, and tuned composition have been explored for optical gain and lasing. Among these, nanocrystals having Type-II electronic structure have been introduced toward low-threshold gain. However, to date, their performance has remained severely limited due to diminishing oscillator strength and modest absorption cross-section. Overcoming these problems, here we realize highly efficient optical gain in Type-II nanocrystals by using alloyed colloidal quantum wells. With composition-tuned core/alloyed-crown CdSe/CdSexTe1-x quantum wells, we achieved amplified spontaneous emission thresholds as low as 26 μJ/cm2, long optical gain lifetimes (τgain ≈ 400 ps), and high modal gain coefficients (gmodal ≈ 930 cm-1). We uncover that the optical gain in these Type-II quantum wells arises from the excitations localized to the alloyed-crown region that are electronically coupled to the charge-transfer state. These alloyed heteronanostructures exhibiting remarkable optical gain performance are expected to be highly appealing for future display and lighting technologies.Item Open Access Near-unity emitting copper-doped colloidal semiconductor quantum wells for luminescent solar concentrators(Wiley-VCH Verlag, 2017) Sharma, M.; Gungor K.; Yeltik A.; Olutas M.; Guzelturk, B.; Kelestemur Y.; Erdem, T.; Delikanli S.; McBride, J. R.; Demir, Hilmi VolkanDoping of bulk semiconductors has revealed widespread success in optoelectronic applications. In the past few decades, substantial effort has been engaged for doping at the nanoscale. Recently, doped colloidal quantum dots (CQDs) have been demonstrated to be promising materials for luminescent solar concentrators (LSCs) as they can be engineered for providing highly tunable and Stokes-shifted emission in the solar spectrum. However, existing doped CQDs that are aimed for full solar spectrum LSCs suffer from moderately low quantum efficiency, intrinsically small absorption cross-section, and gradually increasing absorption profiles coinciding with the emission spectrum, which together fundamentally limit their effective usage. Here, the authors show the first account of copper doping into atomically flat colloidal quantum wells (CQWs). In addition to Stokes-shifted and tunable dopant-induced photoluminescence emission, the copper doping into CQWs enables near-unity quantum efficiencies (up to ≈97%), accompanied by substantially high absorption cross-section and inherently step-like absorption profile, compared to those of the doped CQDs. Based on these exceptional properties, the authors have demonstrated by both experimental analysis and numerical modeling that these newly synthesized doped CQWs are excellent candidates for LSCs. These findings may open new directions for deployment of doped CQWs in LSCs for advanced solar light harvesting technologies.Item Open Access TiO2 assisted sensitivity enhancement in photosensitive nanocrystal skins(IEEE, 2014-10) Yeltik, Aydan; Akhavan, Shahab; Demir, Hilmi VolkanSolution-processable semiconductor nanocrystals (NCs) have been widely used to create novel devices for the photovoltaic, light-emission, light-detection and biosensing applications. They are good candidates especially to develope more efficient and novel optoelectronic devices owing to the high absorption cross-section, spectral tunability, deposition easiness and low cost properties. In recent years, NC integrated photodetectors have been developed to be used in large-area light-sensing applications [1]. These NC-based photodetectors have the ability to convert an optical signal to an electrical signal using the NCs as the optical absorbers. These low-cost devices were initially operated on the basis of charge collection, where an electric field imposed on the detector dissociates the photogenerated excitons into electrons and holes, in which an electric current is produced [2]. On the other hand, as an alternative device structure, we have recently developed the light-sensitive nanocrystal skin (LS-NS) [3]. These LS-NS platforms, which were fabricated over areas up to 48 cm2, are operated on the basis of photogenerated potential buildup, as opposed to conventional charge collection. In operation, close interaction of the monolayer NCs of the LS-NS with the top interfacing contact, while the bottom one is isolated using a high dielectric spacing layer, results in highly sensitive photosensing in the absence of external bias application. Furthermore, NC monolayer of the LS-NS makes the device semi-transparent with sufficient absorption, while reducing the noise generation and dark current. In our other recent work, we also reported that, by using a thick photoactive NC layer, a much lower photovoltage buildup was observed in the LS-NSs and it was attributed to the self-absorption effect [4]. In addition, we demonstrated the sensitivity increase in the LS-NSs via the absorption enhancement of NC film with the integration of plasmonic nanoparticles [5]. However, the localized plasmonic resonance band strongly limits the observed enhancement factor and the resultant operating wavelength range. Furthermore, in the absence of an external bias in the LS-NSs, each exciton tends to remain in the NC layer, where it was created, and recombine with the photogenerated holes that accumulate at the top interfacing contact, which causes also lower voltage buildup in the device. To overcome all these problems, in this study, we propose a thin TiO2 layer as the electron-accepting material and demonstrate the first account of electron transfer in NC-based light-sensitive skins, which leads to significant broadband sensitivity enhancement in the active device architecture. Here, we prove that favorable conduction band offset aids in transferring photogenerated electrons from a monolayer of NCs to an electron-accepting layer, which is ultimately useful for photosensing platforms and the next generation of light-sensing NC devices. © 2014 IEEE.