Browsing by Subject "Absorption peaks"

Now showing 1 - 4 of 4

Open Access
All-chalcogenide variable infrared filter
(SPIE, 2009) Kondakcı, H. Esat; Köyle, Özlem; Yaman, Mecit; Dana, Aykutlu; Bayındır, Mehmet
We present the design, fabrication, characterization of spatially variable infrared filter and a demonstration of the filter as a simple infrared spectrometer. A varying photonic band gap filter which consists of thermally evaporated, high refractive index contrast amorphous chalcogenide glass multilayers, makes the structure suitable to be used as spectrometer. Due to graded thickness structure, the filter exhibits a position dependent stop band and a cavity mode ranging from 2 to 8 μm wavelengths. It is demonstrated that the filter can be used to detect absorption peaks of common gases in the cavity mode range of the filter. © 2009 SPIE.
Open Access
Compound Hertzian chain model for copper-carbon nanocomposites' absorption spectrum
(2011) Kokabi, A.; Hosseini, M.; Saeedi, S.; Moftakharzadeh, A.; Vesaghi, M.A.; Fardmanesh, M.
The infrared range optical absorption mechanism of carbon-copper composite thin layer coated on the diamond-like carbon buffer layer has been investigated. By consideration of weak interactions between copper nanoparticles in their network, optical absorption is modelled using their coherent dipole behaviour induced by the electromagnetic radiation. The copper nanoparticles in the bulk of carbon are assumed as a chain of plasmonic dipoles, which have coupling resonance. Considering nearest neighbour interactions for this metallic nanoparticles, surface plasmon resonance frequency (ω 0) and coupled plasmon resonance frequency (ω 1) have been computed. The damping rate against wavelength is derived, which leads to the derivation of the optical absorption spectrum in terms of ω 0 and ω 1. The dependency of the absorption peaks to the particle size and the particle mean spacing is also investigated. The absorption spectrum is measured for different Cu-C thin films with various Cu particle size and spacing. The experimental results of absorption are compared with the obtained analytical ones. © 2011 The Institution of Engineering and Technology.
Open Access
Experimental verification of metamaterial based subwavelength microwave absorbers
(American Institute of Physics, 2010-10-29) Alici, K. B.; Bilotti, F.; Vegni, L.; Özbay, Ekmel
We designed, implemented, and experimentally characterized electrically thin microwave absorbers by using the metamaterial concept. The absorbers consist of (i) a metal back plate and an artificial magnetic material layer; (ii) metamaterial back plate and a resistive sheet layer. We investigated absorber performance in terms of absorbance, fractional bandwidth, and electrical thickness, all of which depend on the dimensions of the metamaterial unit cell and the distance between the back plate and metamaterial layer. As a proof of concept, we demonstrated a λ/4.7 thick absorber of type I, with a 99.8% absorption peak along with a 8% fractional bandwidth. We have shown that as the electrical size of the metamaterial unit cell decreases, the absorber electrical thickness can further be reduced. We investigated this concept by using two different magnetic metamaterial inclusions: the split-ring resonator (SRR) and multiple SSR (MSRR). We have also demonstrated experimentally a λ/4.7 and a λ/4.2 thick absorbers of type II, based on SRR and MSRR magnetic metamaterial back plates, respectively. The absorption peak of the SRR layout is 97.4%, while for the MSRR one the absorption peak is 98.4%. The 10 dB bandwidths were 9.9% and 9.6% for the SRR and MSRR cases, respectively.
Open Access
Photonic metamaterial absorber designs for infrared solar-cell applications
(SPIE, 2010) Alıcı, Kamil Boratay; Özbay, Ekmel
We propose a metamaterial based absorber design that operates at the infrared regime. The absorption peak was 83.6%. We can incorporate solar-cell layers inside the metamaterial absorber in order to significantly increase solar-cell efficiency. © 2010 SPIE.