Browsing by Author "Vegni, L."
Now showing 1 - 11 of 11
Results Per Page
Sort Options
Item Open Access Design of miniaturized narrowband absorbers based on resonant-magnetic inclusions(IEEE, 2011-06-21) Bilotti, F.; Toscano, A.; Alici, K. B.; Özbay, Ekmel; Vegni, L.In this paper, we present the design of miniaturized narrowband-microwave absorbers based on different kinds of magnetic inclusions. The operation of the proposed components originates from the resonance of a planar array of inclusions excited by an incoming wave with a given polarization. As in common absorber layouts, a 377 Omega resistive sheet is also used to absorb the electromagnetic energy of the impinging field. Since the planar array of magnetic inclusions behaves at its resonance as a perfect magnetic conductor, the resistive sheet is placed in close proximity of the resonating inclusions, without perturbing their resonance condition. In contrast to other typical absorber configurations presented in the literature, the absorber proposed in this paper is not backed by a metallic plate. This feature may be useful for stealth applications, as discussed thoroughly in the paper. The other interesting characteristic of the proposed absorbers is the subwavelength thickness, which has shown to depend only on the geometry of the basic resonant inclusions employed. At first, regular split-ring resonators (SSRs) disposed in an array configuration are considered and some application examples are presented. Absorbers based on SRRs are shown to reach thickness of the order of lambda(0)/20. In order to further squeeze the electrical thickness of the absorbers, multiple SRRs and spiral resonators are also used. The employment of such inclusions leads to the design of extremely thin microwave absorbers, whose thickness may even be close to lambda(0)/100. Finally, some examples of miniaturized absorbers suitable for a practical realization are proposed.Item Open Access Enhanced transmission through a sub-wavelength aperture: resonant approaches employing metamaterials(Institute of Physics Publishing Ltd., 2009-09-17) Bilotti, F.; Scorrano, L.; Özbay, Ekmel; Vegni, L.In this paper, we propose a number of resonant metamaterial-based approaches to enhance the power transmission through sub-wavelength apertures. The extraordinary transmission beyond the diffraction limit is usually obtained using setups that rely on covers supporting proper surface plasmon polaritons or leaky waves. However, the actual implementation in real-life applications of these structures is strongly limited by their large transverse extension. After briefly reviewing the aforementioned limitations, we present in the paper new setups based on resonant approaches, characterized by covers whose transverse dimensions are of the same order of magnitude as the aperture size. The phenomenology of the enhanced transmission, the related theoretical aspects, the results of the numerical simulations and the successful experimental verification using the newly proposed setups are then presented in detail.Item Open Access Enhanced transmission through a subwavelength aperture using metamaterials(AIP Publishing LLC, 2009-08-04) Cakmak, A. O.; Aydin, K.; Colak, E.; Li, Z.; Bilotti, F.; Vegni, L.; Özbay, EkmelWe report an enhanced transmission through a single circular subwavelength aperture that is incorporated with a split ring resonator (SRR) at the microwave regime. Transmission enhancement factors as high as 530 were observed in the experiments when the SRR was located in front of the aperture in order to efficiently couple the electric field component of the incident electromagnetic wave at SRR’s electrical resonance frequency. The experimental results were supported by numerical analyses. The physical origin of the transmission enhancement phenomenon was discussed by examining the induced surface currents on the structures.Item Open Access Enhanced transmission through sub-wavelength apertures by using metamaterials(World Scientific Publishing Co., 2011) Bilotti, F.; Scorrano, L.; Alici, K. B.; Aydin, K.; Cakmak, O.A.; Özbay, Ekmel; Vegni, L.In this chapter, the role of complex artificial structures in enhancing the power transmission through sub-wavelength apertures is discussed. Such devices are aimed at exciting highly localized resonances in order to increase the aperture equivalent magnetic and electric dipole moments. Some examples, based on epsilon-near-zero metamaterials (ENZ), frequency selective surfaces (FSSs) and split-ring resonators (SRRs) at microwaves, and silver nano-particle pairs at terahertz scale, are presented. Such structures may find applications in different fields, such as high-resolution spatial filters, ultra-diffractive imaging systems, high-capacity optical memories, enhanced light throughput tips for near-field scanning optical microscopes, etc. © 2011 by World Scientific Publishing Co. Pte. Ltd. All rights reserved.Item Open Access Equivalent-circuit models for the design of metamaterials based on artificial magnetic inclusions(Institute of Electrical and Electronics Engineers, 2007) Bilotti, F.; Toscana, A.; Vegni, L.; Aydin, K.; Boratay, K.; Özbay, EkmelIn this paper, we derive quasi-static equivalent-circuit models for the analysis and design of different types of artificial magnetic resonators-i.e., the multiple split-ring resonator, spiral resonator, and labyrinth resonator-which represent popular inclusions to synthesize artificial materials and metamaterials with anomalous values of the permeability in the microwave and millimeter-wave frequency ranges. The proposed models, derived in terms of RLC equivalent circuits, represent an extension of the models presented in a recent publication. In particular, the extended models take into account the presence of a dielectric substrate hosting the metallic inclusions and the losses due to the finite conductivity of the conductors and the finite resistivity of the dielectrics. Exploiting these circuit models, it is possible to accurately predict not only the resonant frequency of the individual inclusions, but also their quality factor and the relative permeability of metamaterial samples made by given arrangements of such inclusions. Finally, the three models have been tested against full-wave simulations and measurements, showing a good accuracy. This result opens the door to a quick and accurate design of the artificial magnetic inclusions to fabricate real-life metamaterial samples with anomalous values of the permeability.Item Open Access Experimental verification of metamaterial based subwavelength microwave absorbers(American Institute of Physics, 2010-10-29) Alici, K. B.; Bilotti, F.; Vegni, L.; Özbay, EkmelWe designed, implemented, and experimentally characterized electrically thin microwave absorbers by using the metamaterial concept. The absorbers consist of (i) a metal back plate and an artificial magnetic material layer; (ii) metamaterial back plate and a resistive sheet layer. We investigated absorber performance in terms of absorbance, fractional bandwidth, and electrical thickness, all of which depend on the dimensions of the metamaterial unit cell and the distance between the back plate and metamaterial layer. As a proof of concept, we demonstrated a λ/4.7 thick absorber of type I, with a 99.8% absorption peak along with a 8% fractional bandwidth. We have shown that as the electrical size of the metamaterial unit cell decreases, the absorber electrical thickness can further be reduced. We investigated this concept by using two different magnetic metamaterial inclusions: the split-ring resonator (SRR) and multiple SSR (MSRR). We have also demonstrated experimentally a λ/4.7 and a λ/4.2 thick absorbers of type II, based on SRR and MSRR magnetic metamaterial back plates, respectively. The absorption peak of the SRR layout is 97.4%, while for the MSRR one the absorption peak is 98.4%. The 10 dB bandwidths were 9.9% and 9.6% for the SRR and MSRR cases, respectively.Item Open Access Experimental verification of metamaterial loaded small patch antennas(Emerald Group Publishing Limited, 2013) Alici, K. B.; Caliskan, M. D.; Özbay, Ekmel; Bilotti, F.; Toscano, A.; Vegni, L.Purpose - Metamaterial unit cells composed of deep subwavelength resonators brought up new aspects to the antenna miniaturization problem. The paper experimentally demonstrates a metamaterial-inspired miniaturization method for circular patch antennas. In the proposed layouts, the space between the patch and the ground plane is filled with a proper metamaterial composed of either multiple split-ring or spiral resonators (SRs). The authors have manufactured two different patch antennas, achieving an electrical size of ?/3.69 and ?/8.26, respectively. The paper aims to discuss these issues. Design/methodology/ approach - The operation of such a radiative component has been predicted by using a simple theoretical formulation based on the cavity model. The experimental characterization of the antenna has been performed by using a HP8510C vector network analyzer, standard horn antennas, automated rotary stages, coaxial cables with 50 O characteristic impedance and absorbers. Before the characterization measurements we performed a full two-port calibration. Findings - Electrically small circular patch antennas loaded with single layer metamaterials experimentally demonstrated to acceptable figures of merit for applications. The proposed miniaturization technique is potentially promising for antenna applications and the results presented in the paper constitute a relevant proof for the usefulness of the metamaterial concepts in antenna miniaturization problems. Originality/value - Rigorous experimental characterization of several meta material loaded antennas and proof of principle results were provided. Copyright © 2013 Emerald Group Publishing Limited. All rights reserved.Item Open Access FSS-based approach for the power transmission enhancement through electrically small apertures(Springer, 2011-01-20) Scorrano, L.; Bilotti, F.; Özbay, Ekmel; Vegni, L.In this paper, a novel approach, based on the employment of frequency selective surfaces, to enhance the power transmission through sub-wavelength apertures at the microwave frequencies is presented. A heuristic interpretation of the phenomenon is given, as well as an analytical model, based on the transmission line network representation. Finally, the performance of the proposed structure is validated through a set of full-wave numerical simulations.Item Open Access Miniaturization and characterization of metamaterial resonant particles(IEEE, 2008-10) Aznar, F.; Bonache, J.; Martín, F.; Özbay, Ekmel; Alıcı, K. Boratay; Bilotti, F.; Tricarico, S.; Vegni, L.; Baena, J. D.; Jelinek, L.; Marqués, R.This paper is focussed on the miniaturization and characterization of semi-lumped resonators, of interest for the synthesis of metamaterial-based structures such as metamaterial transmission lines, frequency selective surfaces, absorbers, and radiating elements, among others. The particles consist on metallic patterns etched on a dielectric and are inspired on the split ring resonator, SRR (that is, the formerly resonant particle used for the synthesis of left handed metamaterials). The different strategies for miniaturization are discussed and examples are given. It is shown that by using two metallic levels connected through vias it is possible to achieve very small electrical size for the particles (namely, below λ/100, where λ is the wavelength in the considered substrate at resonance). A method to determine the electrical parameters of the resonators in metamaterial transmission line configurations is also presented, and the possibility to determine the characteristics of the isolated particles is discussed. Finally, examples of application of this technique are presented. This work is of interest for the synthesis of effective media metamaterials based on resonant elements. © 2008 EuMA.Item Open Access Miniaturized negative permeability materials(AIP Publishing LLC, 2007) Alici, K. B.; Bilotti, F.; Vegni, L.; Özbay, EkmelExperimental and numerical studies of μ -negative (MNG) materials such as multisplit ring resonators (MSRRs) and spiral resonators (SRs) are presented. The resonance frequency of the structures is determined by the transmission measurements and minimum electrical size of λ0 17 for the MSRRs and of λ0 82 for the SRs observed. These MNG materials can be easily produced by the well developed printed circuit board and optical lithography techniques. They are promising elements for the development of high resolution metamaterial lenses and electrically small antennas.Item Open Access Split-ring-resonator-coupled enhanced transmission through a single subwavelength aperture(American Physical Society, 2009) Aydin, K.; Cakmak, A. O.; Sahin, L.; Li, Z.; Bilotti, F.; Vegni, L.; Özbay, EkmelWe report the enhanced transmission of electromagnetic waves through a single subwavelength aperture by using a split-ring resonator (SRR) at microwave frequencies. By placing a single SRR at the near field of the aperture, strongly localized electromagnetic fields are effectively coupled to the aperture with a radius that is 20 times smaller than the resonance wavelength (r/λ=0.05). We obtained 740-fold transmission enhancement by exciting the electric resonance of SRR. A different coupling mechanism, through the magnetic resonance of SRR, is also verified to lead to enhanced transmission.