Browsing by Author "Hideur, A."

Filter results by typing the first few letters
Now showing 1 - 7 of 7
  • Thumbnail Image
    ItemOpen Access
    130 nJ 77 fs dissipative soliton fiber laser
    (OSA, 2010) Baumgartl, M.; Ortaç, Bülend; Lecaplain, C.; Hideur, A.; Limpert J.; Tünnermann, A.
    We report on ultrashort high-energy pulse generation from an all-normal-dispersion fiber oscillator. The watt-level laser directly emits chirped pulses with a duration of 1ps and 163nJ of pulse energy. These can be compressed to 77fs. © 2010 Optical Society of America.
  • Thumbnail Image
    ItemOpen Access
    Femtosecond microjoule-Class ytterbium fiber lasers
    (Optical Society of America, 2011) Lecaplain, C.; Ortaç, Bülend; Machinet G.; Boullet J.; Baumgartl, M.; Schreiber, T.; Cormier, E.; Hideur, A.
    We report the generation of 830 nJ energy from a mode-locked all-normal dispersion fiber laser featuring large-mode-area photonic crystal fibers. After external compression, 550 fs pulses with 1.2 MW peak power are demonstrated. © 2011 OSA.
  • Thumbnail Image
    ItemOpen Access
    Generation of parabolic bound pulses from a Yb-fiber laser
    (Optical Society of American (OSA), 2006) Ortaç, B.; Hideur, A.; Brunel, M.; Chédot, C.; Limpert J.; Tünnermann, A.; Ilday F.Ö.
    We report the observation of self-similar propagation of bound-state pulses in an ytterbium-doped double-clad fiber laser. A bound state of two positively chirped parabolic pulses with 5.4 ps duration separated by 14.9 ps is obtained, with 1.7 nJ of energy per pulse. These pulses are extra-cavity compressed to 100 fs. For higher pumping power and a different setting of the intra-cavity polarization controllers, the laser generates a bound state of three chirped parabolic pulses with different time separations and more than 1.5 nJ energy per pulse. Perturbation of this bound state by decreasing pump power results in the generation of a single pulse and a two-pulse bound state both structures traveling at the same velocity along the cavity. A possible explanation of the zero relative speed by a particular phase relation of the bound states is discussed. ©2006 Optical Society of America.
  • Thumbnail Image
    ItemOpen Access
    High-energy femtosecond photonic crystal fiber laser
    (2010) Lecaplain, C.; Ortaç, B.; MacHinet G.; Boullet J.; Baumgart, M.; Schreiber, T.; Cormier, E.; Hideur, A.
    We report the generation of high-energy high-peak power pulses in an all-normal dispersion fiber laser featuring large-mode-area photonic crystal fibers. The self-starting chirped-pulse fiber oscillator delivers 11 W of average power at 15:5 MHz repetition rate, resulting in 710 nJ of pulse energy. The output pulses are dechirped outside the cavity from 7 ps to nearly transform-limited duration of 300 fs, leading to pulse peak powers as high as 1:9 MW. Numerical simulations reveal that pulse shaping is dominated by the amplitude modulation and spectral filtering provided by a resonant semiconductor saturable absorber. © 2010 Optical Society of America.
  • Thumbnail Image
    ItemOpen Access
    Properties of a microjoule-class fiber oscillator mode-locked with a SESAM
    (IEEE, 2011) Lecaplain, C.; Ortac, Bülend; MacHinet G.; Boullet J.; Baumgartl, M.; Schreiber, T.; Cormier, E.; Hideur, A.
    Energy scaling of ultrafast Yb-doped fiber oscillators has experienced rapid progress largely driven by many applications that require high average power femtosecond pulses. The fundamental challenge for ultrafast fiber lasers relies on the control of excessive nonlinearity, which limits pulse energy. The development of all-normal dispersion laser cavities based on large-mode-area photonic crystal fibers (PCFs) has enabled significant energy scaling [1-3]. In particular, up to microjoule energy levels have been achieved from rod-type fiber-based oscillators [2-3]. In such lasers, pulse shaping is dominated by the strength of the mode-locking mechanism which determines the pulse properties. In this contribution, we report the generation of high-energy sub-picosecond pulses from a highly normal dispersion fiber laser featuring an Yb-doped rod-type PCF and a large-mode-area PCF [Fig.1(a)]. Passive mode-locking is achieved using saturable absorber mirrors (SAMs). We study the influence of the SAM parameters on performances obtained in this new class of fiber oscillators. The structures exhibit 20 % modulation depths and 500 fs relaxation time with resonant and antiresonant designs. The antiresonant SAM structures ensure absorption bandwidths 45 nm while the resonant structures exhibit 20 nm bandwidths. Stable mode locking with average powers as high as 15 μW at 15 MHz repetition rate, corresponding to microjoule energy level are obtained with all the structures. However, pulse properties and pulse shaping mechanism distinguish between resonant and antiresonant designs. Using a broadband antiresonant SAM leads to generation of highly-chirped pulses with 30 ps duration and 10 nm spectral width [Fig.1(b)]. The output pulses are extra-cavity dechirped down to 550 fs duration. By increasing the strength of the mode-locking mechanism through the combination of the SAM with the NPE process, we obtain shorter pulses with slightly boarder spectra. Indeed, the output pulse duration is decreased from 30 ps to 13 ps by adjusting the wave-plates settings. The dechirped pulse duration is then shortened to 450 fs. We note that the current laser performances are limited to 1 J by the available pump power. Using a resonant SAM structure, the output pulse duration is decreased to 7 ps [Fig.1(b)]. This pulse shortening results from the spectral filtering induced by the limited SAM bandwidth. All these results are in good agreement with numerical simulations which will be discussed in this communication. © 2011 IEEE.
  • Thumbnail Image
    ItemOpen Access
    Sub-80 fe dissipative soliton large-mode-area fiber laser
    (2010) Baumgartl, M.; Ortaç, B.; Lecaplain, C.; Hideur, A.; Limpert J.; Tünnermann, A.
    We report on high-energy ultrashort pulse generation from an all-normal-dispersion large-mode-area fiber laser by exploiting an efficient combination of nonlinear polarization evolution (NPE) and a semiconductor-based saturable absorber mode-locking mechanism. The watt-level laser directly emits chirped pulses with a duration of 1 ps and 163 nJ of pulse energy. These can be compressed to 77 fs, generating megawatt-level peak power. Intracavity dynamics are discussed by numerical simulation, and the intracavity pulse evolution reveals that NPE plays a key role in pulse shaping. © 2010 Optical Society of America.
  • Thumbnail Image
    ItemOpen Access
    Sub-picosecond microjoule-class fiber lasers
    (Optical Society of America, 2011) Lecaplain, C.; Ortaç, Bülend; MacHinet G.; Boullet J.; Baumgartl, M.; Schreiber, T.; Cormier, E.; Hideur, A.
    We study the impact of the mode-locking mechanism on the performances of a microjoule-class all-normal dispersion fiber laser featuring large-mode-area photonic crystal fibers. © 2011 OSA.