Browsing by Author "Dang C."

Now showing 1 - 10 of 10

Open Access
Anomalous spectral characteristics of ultrathin sub-nm colloidal CdSe nanoplatelets
(Optical Society of America, 2017) Bose S.; Delikanlı, Savaş; Yeltik, Aydan; Sharma, Manoj; Erdem, Onur; Dang C.; Fan W.; Zhang D.H.; Demir, Hilmi Volkan
We demonstrate high quantum yield broad photoluminescence emission of ultrathin sub-nanometer CdSe nanoplatelets (two-monolayer). They also exhibit polarization-characterized lateral size dependent anomalous heavy hole and light/split-off hole absorption intensities. © 2017 IEEE.
Open Access
Azimuthally polarized, circular colloidal quantum dot laser beam enabled by a concentric grating
(American Chemical Society, 2016) Gao, Y.; Tobing, L. Y. M.; Kiffer, A.; Zhang, D. H.; Dang C.; Demir, Hilmi Volkan
Since optical gain was observed from colloidal quantum dots (CQDs), research on CQD lasing has been focused on the CQDs themselves as gain materials and their coupling with optical resonators. Combining the advantages of a CQD gain medium and optical microcavity in a laser device is desirable. Here, we show concentric circular Bragg gratings intimately incorporating CdSe/CdZnS/ZnS gradient shell CQDs. Because of the strong circularly symmetric optical confinement in two dimensions, the output beam CQD-based circular grating distributed feedback laser is found to be highly spatially coherent and azimuthally polarized with a donut-like cross section. We also observe the strong modification of the photoluminescence spectrum by the grating structures, which is associated with modification of optical density of states. This effect confirmed the high quality of the resonator that we fabricated and the spectral overlap between the optical transitions of the emitter and resonance of the cavity. Single mode lasing has been achieved under a quasi-continuous pumping regime, while the position of the lasing mode can be conveniently tuned via adjusting the thickness of the CQD layer. Moreover, a unidirectional output beam can be observed as a bright circular spot on a screen without any collimation optics, presenting a direct proof of its high spatial coherence.
Open Access
Electroluminescence efficiency enhancement in quantum dot light-emitting diodes by embedding a silver nanoisland layer
(Wiley-VCH Verlag, 2015) Yang, X.; Hernandez-Martinez, P. L.; Dang C.; Mutlugün, E.; Zhang, K.; Demir, Hilmi Volkan; Sun X. W.
A colloidal quantum dot light-emitting diode (QLED) is reported with substantially enhanced electroluminescence by embedding a thin layer of Ag nanoislands into hole transport layer. The maximum external quantum efficiency (EQE) of 7.1% achieved in the present work is the highest efficiency value reported for green-emitting QLEDs with a similar structure, which corresponds to 46% enhancement compared with the reference device. The relevant mechanisms enabling the EQE enhancement are associated with the near-field enhancement via an effective coupling between excitons of the quantum dot emitters and localized surface plasmons around Ag nano-islands, which are found to lead to good agreement between the simulation results and the experimental data, providing us with a useful insight important for plasmonic QLEDs. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Open Access
Exciton dynamics in colloidal quantum-dot LEDs under active device operations
(American Chemical Society, 2018) Shendre, S.; Sharma, V. K.; Dang C.; Demir, Hilmi Volkan
Colloidal quantum-dot light-emitting diodes (QLEDs) are lucrative options for color-pure lighting sources. To achieve high-performance QLEDs, besides developing high-efficiency quantum dots (QDs), it is essential to understand their device physics. However, little understanding of the QD emission behavior in active QLEDs is one of the main factors hindering the improvement of device efficiency. In this work, we systematically studied the exciton dynamics of gradient composition CdSe@ZnS QDs during electroluminescence in a working QLED. With time-resolved photoluminescence analyses using fluorescence lifetime imaging microscopy we analyzed a large population of QDs spatially spreading over an extended area inside and outside the device. This allows us to reveal the statistically significant changes in the behavior of QD emission in the device at different levels of applied voltages and injection currents. We find that the QD emission efficiency first drops in device fabrication with Al electrode deposition and that the QD exciton lifetime is then statistically reduced further under the QLED's working conditions. This implies the nonradiative Auger recombination process is active in charged QDs as a result of imbalanced charge injection in a working QLED. Our results help to understand the exciton behavior during the operation of a QLED and demonstrate a new approach to explore the exciton dynamics statistically with a large QD population.
Open Access
Green stimulated emission boosted by nonradiative resonant energy transfer from blue quantum dots
(American Chemical Society, 2016) Gao, Y.; Yu, G.; Wang Y.; Dang C.; Sum, T. C.; Sun, H.; Demir, Hilmi Volkan
Thanks to their tunability and versatility, the colloidal quantum dots (CQDs) made of II-VI semiconductor compound offer the potential to bridge the "green gap" in conventional semiconductors. However, when the CQDs are pumped to much higher initial excitonic states compared to their bandgap, multiexciton interaction is enhanced, leading to a much higher stimulated emission threshold. Here, to circumvent this drawback, for the first time, we show a fully colloidal gain in green enabled by a partially indirect pumping approach assisted by Förster resonance energy transfer process. By introducing the blue CQDs as exciton donors, the lasing threshold of the green CQDs, is reduced dramatically. The blue CQDs thus serve as an energy-transferring buffer medium to reduce excitation energy from pumping photons in a controlled way by injecting photoinduced excitons into green CQDs. Our newly developed colloidal pumping scheme could enable efficient CQD lasers of full visible colors by a single pump source and cascaded exciton transfer. This would potentially pave the way for an efficient multicolor laser for lighting and display applications.
Open Access
High performance infrared photodetectors up to 2.8 μm wavelength based on lead selenide colloidal quantum dots
(OSA - The Optical Society, 2017) Thambidurai, M.; Jang, Y.; Shapiro, A.; Yuan, G.; Xiaonan, H.; Xuechao, Y.; Wang, Q. J.; Lifshitz, E.; Demir, Hilmi Volkan; Dang C.
The strong quantum confinement effect in lead selenide (PbSe) colloidal quantum dots (CQDs) allows to tune the bandgap of the material, covering a large spectral range from mid- to near infrared (NIR). Together with the advantages of low-cost solution processability, flexibility and easy scale-up production in comparison to conventional semiconductors especially in the mid- to near infrared range, PbSe CQDs have been a promising material for infrared optoelectronic applications. In this study, we synthesized monodisperse and high purity PbSe CQDs and then demonstrated the photodetectors working at different wavelengths up to 2.8 μm. Our high quality PbSe CQDs show clear multiple excitonic absorption peaks. PbSe CQD films of different thicknesses were deposited on interdigitated platinum electrodes by a simple drop casting technique to make the infrared photodetectors. At room temperature, the high performances of our PbSe CQD photodetectors were achieved with maximum responsivity, detectivity and external quantum efficiency of 0.96 A/W, 8.13 × 109 Jones and 78% at 5V bias. Furthermore, a series of infrared LEDs with a broad wavelength range from 1.5 μm to 3.4 μm was utilized to demonstrate the performance of our fabricated photodetectors with various PbSe CQD film thicknesses.
Open Access
Low-threshold lasing from colloidal CdSe/CdSeTe core/alloyed-crown type-II heteronanoplatelets
(Royal Society of Chemistry, 2018) Gao, Y.; Li, M.; Delikanli S.; Zheng, H.; Liu, B.; Dang C.; Sum, T. C.; Demir, Hilmi Volkan
Colloidal type-II heterostructures are believed to be a promising solution-processed gain medium given their spatially separated electrons and holes for the suppression of Auger recombination and their wider emission tuning range from the visible to near-infrared region. Amplified spontaneous emission (ASE) was achieved from colloidal type-II core/shell nanocrystals several years ago. However, due to the limited charge-transfer (CT) interfacial states and minimal overlap of electron and hole wave functions, the ASE threshold has still been very high. Herein, we achieved ASE through type-II recombination at a lower threshold using CdSe/CdSeTe core/alloyed-crown nanoplatelets. Random lasing was also demonstrated in the film of these nanoplatelets under sub-ns laser-pumping. Through a detailed carrier dynamics investigation using femtosecond transient absorption, steady state, and time-resolved photoluminescence (PL) spectroscopies, we confirmed the type-II band alignment, and found that compared with normal CdSe/CdTe core/crown nanoplatelets (where no ASE/lasing was observed), CdSe/CdSeTe core/alloyed-crown nanoplatelets had a much higher PL quantum yield (75% vs. 31%), a ∼5-fold larger density of type-II charge-transfer states, a faster carrier transfer to interfaces (0.32 ps vs. 0.61 ps) and a slower Auger recombination lifetime (360 ps vs. 160 ps). Compared with CdSe/CdTe nanoplatelets, their counterparts with an alloyed crown boast a promoted charge transfer process, higher luminescence quantum yield, and smaller Auger rate, which results in their excellent application potential in solution-processed lasers and light-emitting devices.
Open Access
Observation of polarized gain from aligned colloidal nanorods
(Royal Society of Chemistry, 2015) Gao, Y.; Ta, V. D.; Zhao, X.; Wang Y.; Chen R.; Mutlugün, E.; Fong, K. E.; Tan S.T.; Dang C.; Sun, X. W.; Sun, H.; Demir, Hilmi Volkan
In recent years, colloidal semiconductor nanorods have attracted great interest for polarized spontaneous emission. However, their polarized gain has not been possible to achieve so far. In this work we show the highly polarized stimulated emission from the densely packed ensembles of core-seeded nanorods in a cylindrical cavity. Here CdSe/CdS dot-in-rods were coated and aligned on the inner wall of a capillary tube, providing optical feedback for the nanorod gain medium. Results show that the polarized gain originates intrinsically from the aligned nanorods and not from the cavity and that the optical anisotropy of the nanorod ensemble was amplified with the capillary tube, resulting in highly polarized whispering gallery mode lasing. The highly polarized emission and lasing, together with easy fabrication and flexible incorporation, make this microlaser a promising candidate for important color conversion and enrichment applications including liquid crystal display backlighting and laser lighting. This journal is © The Royal Society of Chemistry.
Open Access
Temperature-dependent optoelectronic properties of quasi-2D colloidal cadmium selenide nanoplatelets
(Royal Society of Chemistry, 2017) Bose, S.; Shendre, S.; Song, Z.; Sharma, V. K.; Zhang, D. H.; Dang C.; Fan, W.; Demir, Hilmi Volkan
Colloidal cadmium selenide (CdSe) nanoplatelets (NPLs) are a recently developed class of efficient luminescent nanomaterials suitable for optoelectronic device applications. A change in temperature greatly affects their electronic bandstructure and luminescence properties. It is important to understand how and why the characteristics of NPLs are influenced, particularly at elevated temperatures, where both reversible and irreversible quenching processes come into the picture. Here we present a study of the effect of elevated temperatures on the characteristics of colloidal CdSe NPLs. We used an effective-mass envelope function theory based 8-band k·p model and density-matrix theory considering exciton-phonon interaction. We observed the photoluminescence (PL) spectra at various temperatures for their photon emission energy, PL linewidth and intensity by considering the exciton-phonon interaction with both acoustic and optical phonons using Bose-Einstein statistical factors. With a rise in temperature we observed a fall in the transition energy (emission redshift), matrix element, Fermi factor and quasi Fermi separation, with a reduction in intraband state gaps and increased interband coupling. Also, there was a fall in the PL intensity, along with spectral broadening due to an intraband scattering effect. The predicted transition energy values and simulated PL spectra at varying temperatures exhibit appreciable consistency with the experimental results. Our findings have important implications for the application of NPLs in optoelectronic devices, such as NPL lasers and LEDs, operating much above room temperature.
Open Access
Unraveling exciton kinetics of electroluminescence in colloidal quantum dot LEDs
(Optical Society of America, 2016) Shendre S.; Dang C.; Demir, Hilmi Volkan
We systematically studied emission kinetics of colloidal quantum dots in active light-emitting diodes using time-correlated single photon counting and conclusively revealed the combined effect of both electric field and charging acting together in reducing the quantum efficiency during operation. ï¿½ 2016 OSA.