Browsing by Author "Akin, T."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
Item Open Access Atomic-layer-deposited zinc oxide as tunable uncooled infrared microbolometer material(Wiley-VCH Verlag, 2014) Battal, E.; Bolat, S.; Tanrikulu, M. Y.; Okyay, Ali Kemal; Akin, T.ZnO is an attractive material for both electrical and optical applications due to its wide bandgap of 3.37 eV and tunable electrical properties. Here, we investigate the application potential of atomic-layer-deposited ZnO in uncooled microbolometers. The temperature coefficient of resistance is observed to be as high as-10.4% K-1 near room temperature with the ZnO thin film grown at 120 °C. Spectral noise characteristics of thin films grown at various temperatures are also investigated and show that the 120 °C grown ZnO has a corner frequency of 2 kHz. With its high TCR value and low electrical noise, atomic-layer-deposited (ALD) ZnO at 120 °C is shown to possess a great potential to be used as the active layer of uncooled microbolometers. The optical properties of the ALD-grown ZnO films in the infrared region are demonstrated to be tunable with growth temperature from near transparent to a strong absorber. We also show that ALD-grown ZnO can outperform commercially standard absorber materials and appears promising as a new structural material for microbolometer-based applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.Item Open Access A plasmonically enhanced pixel structure for uncooled microbolometer detectors(SPIE, 2013) Erturk O.; Battal, Enes; Kucuk, S.E.; Okyay, Ali Kemal; Akin, T.This paper introduces a method of broadband absorption enhancement that can be integrated with the conventional suspended microbolometer process with no significant additional cost. The premise of this study is that electric field can be enhanced throughout the structural layer of the microbolometer, resulting in an increase in the absorption of the infrared radiation in the long wave infrared window. A concentric double C-shaped plasmonic geometry is simulated using the FDTD method, and this geometry is fabricated on suspended pixel arrays. Simulation results and FTIR measurements are in good agreement indicating a broadband absorption enhancement in the 8 μm - 12 μm range for LWIR applications. The enhancement is attained using metallic geometries embedded in the structural layer of the suspended microbridge, where the metallic-dielectric interface increases the average absorption of a 35 μm pixel from 67.6% to 80.1%. © 2013 SPIE.