Novel light-sensitive nanocrystal skins

Date
2013
Editor(s)
Advisor
Demir, Hilmi Volkan
Supervisor
Co-Advisor
Co-Supervisor
Instructor
Source Title
Print ISSN
Electronic ISSN
Publisher
Bilkent University
Volume
Issue
Pages
Language
English
Journal Title
Journal ISSN
Volume Title
Series
Abstract

Light sensing devices traditionally made from crystalline or amorphous silicon, operating at the visible and near-infrared wavelengths, have led to a multibillion-dollar annual market. However, silicon faces various limitations including weak detection at long wavelengths (insufficient beyond 1.1 µm) with a cut-off at short wavelengths (in the ultraviolet) and small-area applications. On the other hand, solution-processed semiconductor nanocrystals (NCs), also known as colloidal quantum dots, offer large-area light sensing platforms with strong absorption cross-section. In this thesis we propose and demonstrate a new class of large-area, semi-transparent, light-sensitive nanocrystal skin (LS-NS) devices intended for large-surface applications including smart transparent windows and light-sensitive glass facades of smart buildings. These LS-NS platforms, which are fabricated over areas up to many tens of cm2 using spraycoating and several cm-squares using dip-coating, are operated on the basis of photogenerated potential buildup, as opposed to conventional charge collection. The close interaction of the monolayer NCs of the LS-NS with the top interfacing metal contact results in highly sensitive photodetection in the absence of external bias, while the bottom side is isolated using a high dielectric spacing layer. In operation, electron-hole pairs created in the NCs of the LS-NS are disassociated and separated at the NC monolayer - metal interface due to the difference in the workfunctions. As a result, the proposed LS-NS platforms perform as highly sensitive photosensors, despite using a single NC monolayer, which makes the device semi-transparent and reduces the noise generation Furthermore, because of the band gap tunability, it is possible to construct cascaded NC layers with a designed band gap gradient where the NC diameters monotonically change. Here we present the first account of exciton funneling in an active device, which leads to significant performance improvement in the device. We show highly photosensitive NC skins employing the exciton funneling across the multiple layers of NC film. To further enhance the device photosensitivity performance, we demonstrate embedding plasmonic nanoparticles into the light-sensitive skins of the NCs. In addition, we exhibit the LS-NS device sensitivity enhancement utilizing the device architecture of semi-transparent tandem skins, the addition of TiO2 layer for increased charge carrier dissociation, and the phenomenon of multiexciton generation in infrared NCs. With fully sealed NC monolayers, LS-NS is found to be highly stable under ambient conditions, promising for low-cost large-area UV/visible sensing in windows and facades of smart buildings. We believe the findings presented in this thesis have significant implications for the future design of photosensing platforms and for moving toward next generation large-surface light-sensing platforms.

Course
Other identifiers
Book Title
Citation
Published Version (Please cite this version)