Show simple item record

dc.contributor.authorPavlov, I.en_US
dc.contributor.authorIlbey, E.en_US
dc.contributor.authorDulgergil, E.en_US
dc.contributor.authorBayri, A.en_US
dc.contributor.authorIlday, F. O.en_US
dc.date.accessioned2015-07-28T12:05:12Z
dc.date.available2015-07-28T12:05:12Z
dc.date.issued2012en_US
dc.identifier.issn1094-4087
dc.identifier.urihttp://hdl.handle.net/11693/13219
dc.description.abstractWe demonstrate an all-fiber-integrated, high-power chirped-pulse-amplification system operating at 1550 nm. The seed source is a soliton fiber laser with 156 MHz repetition rate. Two-stage single mode amplifier provides an amplification of more than 40 dB without significant spontaneous amplified emission. The power amplifier is based on cladding-pumped 10 mu m-core Er-Yb co-doped fiber, the output of which was spliced into standard singlemode fiber. We obtain 10 W average power in a strictly singlemode operation. After dechirping with a grating compressor, near transform-limited, 450 fs-long pulses are obtained. The laser source exhibits excellent short and long-term intensity stability, with relative intensity noise measurements characterizing the short-term stability. (C) 2012 Optical Society of Americaen_US
dc.language.isoEnglishen_US
dc.source.titleOptics Expressen_US
dc.relation.isversionofhttp://dx.doi.org/10.1364/OE.20.009471en_US
dc.subjectArea Erbium Fiberen_US
dc.subjectPicosecond Pulsesen_US
dc.subjectAmplificationen_US
dc.subjectNoiseen_US
dc.titleHigh-power-high-repetition-rate-single-mode Er-Yb-doped fiber laser systemen_US
dc.typeArticleen_US
dc.departmentDepartment of Physicsen_US
dc.citation.spage9471en_US
dc.citation.epage9475en_US
dc.citation.volumeNumber20en_US
dc.citation.issueNumber9en_US
dc.identifier.doi10.1364/OE.20.009471en_US
dc.publisherOptical Society of Americaen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record