Browsing by Subject "Radio communication"
Now showing 1 - 9 of 9
Results Per Page
Sort Options
Item Open Access A 128-bit microprocessor compatible programmable correlator chip for use in synchronous communication(IEEE, 1989) Ungan, İ. Enis; Topçu, Satılmış; Atalar, AbdullahA single-chip microprocessor-compatible 128-b correlator is designed and implemented in a 3-μm M2CMOS process. Full-custom design techniques are applied to achieve the best tradeoff among chip size, speed, and power consumption. The chip is placed in a microprocessor-based portable data terminal using HF radio communication. It marks the beginning of a synchronous data stream received from the very noisy channel by detecing the synchronization (sync) word. The sync word can be detected for either inverted or noninverted input data streams. Two chips can be cascaded to make a 256-b correlator. The chip is fully programmable by a microprocessor to set the number of tolerable errors in detection and to select the bits of the 128-b (or 256-b) data stream to be used in the correlation.Item Open Access Design of dual-frequency probe-fed microstrip antennas with genetic optimization algorithm(IEEE, 2003) Ozgun, O.; Mutlu, S.; Aksun, M. I.; Alatan, L.Dual-frequency operation of antennas has become a necessity for many applications in recent wireless communication systems, such as GPS, GSM services operating at two different frequency bands, and services of PCS and IMT-2000 applications. Although there are various techniques to achieve dual-band operation from various types of microstrip antennas, there is no efficient design tool that has been incorporated with a suitable optimization algorithm. In this paper, the cavity-model based simulation tool along with the genetic optimization algorithm is presented for the design of dual-band microstrip antennas, using multiple slots in the patch or multiple shorting strips between the patch and the ground plane. Since this approach is based on the cavity model, the multiport approach is efficiently employed to analyze the effects of the slots and shorting strips on the input impedance. Then, the optimization of the positions of slots and shorting strips is performed via a genetic optimization algorithm, to achieve an acceptable antenna operation over the desired frequency bands. The antennas designed by this efficient design procedure were realized experimentally, and the results are compared. In addition, these results are also compared to the results obtained by the commercial electromagnetic simulation tool, the FEM-based software HFSS by ANSOFT.Item Open Access Distance laboratory applications ERRL: A study on radio communication in electronic field(IEEE, 2008-05) Aydın, C. Ç.; Türkmen, G.; Özyurt, E.; Aydın, E. U.; Çaǧıltay, N. E.; Özbek, M. E.; Alparslan, N. Ceren; Kara, A.In the last decade, the effect of internet usage in education is gradually increased. When we look from academic perspective, the new technologies provided alternatives for students learning. As distance education becomes important everyday, the indispensable elements of teaching and education, laboratories must be reachable via remote connection. Consequently, the education that is going to be given to the students will be more flexible with respect to place and time constraints and students can reach laboratory facilities at any time and anywhere not only in lectures and practical hours. In this study, European Remote Radio Laboratory (ERRL) which is a distance remote Radio Frequency (RF) laboratory designed for electrical-electronics students, is described generally. The software architecture, infrastructure and experiment that can be done with a remote connection have been described.Item Open Access A distributed positioning algorithm for cooperative active and passive sensors(IEEE, 2010) Gholami, M.R.; Gezici, Sinan; Rydström, M.; Ström, E.G.The problem of positioning a target node is studied for wireless sensor networks with cooperative active and passive sensors. Two-way time-of-arrival and time-difference-of-arrival measurements made by both active and passive nodes are used to estimate the position of the target node. A maximum likelihood estimator (MLE) can be employed to solve the problem. Due to the nonlinear nature of the cost function in the MLE, an iterative search might converge to local minima which often results in large estimation errors. To avoid this drawback, we instead formulate the problem of positioning as finding the intersection of a number of convex sets derived from measurements. To obtain this intersection, we apply the projection onto convex sets approach, which is robust and can be implemented in a distributed manner. Simulations are performed to compare the performance of the MLE and the proposed method. ©2010 IEEE.Item Open Access The effect of terrain roughness in the microwave line-of-sight multipath fading estimation based on Rec. ITU-R P.530-15(IEEE, 2014-08) Göktas, Polat; Altıntaş, Ayhan; Topçu, Satılmış; Karasan, EzhanMultipath fading is an important constraint on the prediction of path loss for terrestrial line-of-sight microwave links. The International Telecommunication Union - Radiocommunication (ITU-R) Rec. P.530 [1] is one of the most widely used methods providing guidelines for the design of terrestrial line-of-sight links. The purpose of the study presented in this paper is to make an investigation of the effect of both terrain roughness and geoclimatic factor parameters in the path loss characteristics of microwave line-of-sight (LOS) propagation in NATO Band 3+ (1350-2690 MHz) and NATO Band 4 (4440-5000 MHz) frequency ranges. The two parameters led to significantly different results for the link availability due to multipath fading as a function of the fade margin. © 2014 IEEE.Item Open Access How to teach usage of equipments in a remote laboratory(IEEE, 2007-09) Alparslan, N. Ceren; Özen, M.; Cağiltay, N. E.; Aydın, E.European Remote Radio Laboratory (ERRL) is an e-learning project for students, teachers and technicians of the universities who will use the very important devices of this laboratory remotely. These devices are very expensive to buy and can be broken easily while they have been using by the people who does not really know how to use them professionally. As a solution we have developed an e-learning system which aims to support the ERRL learners while studying on how to use equipments in the system. The system is developed according to the electronic performance support systems (EPSS) approach. An EPSS is a computer-based, well-structured system which improves the performance of individuals. It is an electronic infrastructure that contains, stores and distributes personal (individual) or corporate knowledge to enable people to reach necessary levels of performance in the fastest possible time and with minimum teaching support of other people. This paper discusses how the content for such a system is developed and how this content is interactively used in the EPSS platform. The technical details of the developed EPSS are also discussed in this study. We believe that this paper will help instructional system designers for designing different alternatives to improve learners' performance. © 2007 IEEE.Item Open Access Signaling alternatives in a wireless ATM network(1997) Akyol, B.A.; Cox, D.C.The world of wireless telecommunications is rapidly changing. The capabilities of wireless networks are improving at a steady pace. This paper presents two possible protocols for implementing mobility for wireless users in an asynchronous transfer mode (ATM) network. The vision of the authors is of one "wireless ATM telecommunications network" that is capable of supporting a variety of today's applications with room to grow for advanced applications of the future. We first visit database architectures that can support mobility in a wireless ATM network. We then discuss one of two signaling architecture alternatives, the "overlay signaling," for overlay support of mobile users in the ATM-based wireless telecommunications network. "Overlay signaling" aims at minimizing the modification needed to the existing ATM protocols. We then describe a native "migratory signaling" approach that further integrates wireless and wireline users into one global wireless ATM network at the expense of requiring some modifications to the existing ATM protocols. A performance analysis of the proposed signaling architecture alternatives is also presented. We conclude by pointing out some challenges in merging ATM with wireless telecommunications.Item Open Access Time-delay estimation in multiple-input single-output systems(IEEE, 2010) Koçak, Fatih; Gezici, SinanIn this paper, the time-delay estimation problem is studied for multiple-input single-output (MISO) systems. First, a theoretical analysis is carried out by deriving the Cramer-Rao lower bound (CRLB) for time-delay estimation in a MISO system. Then, the maximum likelihood (ML) estimator for the time-delay parameter is obtained, which results in a complex optimization problem in general. In order to provide a solution of the ML estimator with low computational complexity, ML estimation based on a genetic global optimization algorithm, namely, differential evolution (DE), is proposed. Simulation studies for various fading scenarios are performed to investigate the performance of the proposed algorithm. ©2010 IEEE.Item Open Access Wireless ATM: limits, challenges, and proposals(Institute of Electrical and Electronics Engineers, 1996) Ayanoglu, E.; Eng, K. Y.; Karol, M. J.Recently, there has been an increased interest in the topic of "wireless ATM." The subject matter raises interest due to the potential combination of two of the hottest topics in communications of the mid-'90s, but at the same time raises a natural question as to its viability, and sometimes even its desirability. In this article the authors survey potential applications of wireless ATM and describe what is usually meant by wireless ATM, why it may make sense, and some of the proposals to build systems based on it. The emphasis in this article is on the physical layer, the data link layer, and the access layer. The authors also present general observations on each of these layers, and some research solutions to these problems. Mobility issues and interoperability with the existing networks are addressed. Finally, the authors list some of the proposals to build wireless ATM systems from the literature.