Browsing by Subject "Point of care"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
Item Open Access Bio-insprired optoelectronic digital nose for breath analysis(2011) Bayındır, Mehmet; Yıldırım, Adem; Yaman, Mecit; Vural, MertA novel electronic nose device is presented that can be used in disease diagnostics by exhaled breath analysis. Exhaled breath contains more than a thousand organic compounds that can be analysed to insect various diseases and metabolic activity. The novel device is an electronic nose, based on photonic bandgap fibers that can selectively guide infrared radition inside a hollow core plastic fiber. Instead of a laser line source, a broadband balackbody source is used that exploits the filtering/ guiding properties of the fibers to scan the whole mid-infrared region, making it high selectivity of volatile organic compounds possible. In addition waveguiding inside the fiber enhances the electromagnetic radiation intensity, resulting in improved infrared absorption cross-section. The fiber electronic nose can be integrated and deployed as a portable electronics device to point-of-care institutes.Item Open Access A microfluidic erythrocyte sedimentation rate analyzer using rouleaux formation kinetics(Springer Verlag, 2017-03) Isiksacan, Z.; Asghari, M.; Elbuken, C.Red blood cell aggregation is an intrinsic property of red blood cells that form reversible stacked structures, also called rouleaux, under low shear rates. Erythrocyte sedimentation rate (ESR), commonly performed in clinics, is an indirect inflammation screener and a prognostic test for diseases. We have recently developed a microfluidic system for rapid measurement of ESR from 40 µl whole blood employing the aggregation dynamics. In this work, we propose the use of an aggregation inducer, dextran polyglucose, for the preparation of multiple blood samples with differing aggregation dynamics. Using these samples, we characterized the performance of the system with three aggregation indices and under varying experimental conditions. Additionally, using the same underlying principle, we improved the system for ESR measurement using both venipuncture and fingerprick whole blood samples depending on the user needs. The results demonstrate that the system performs equally well with both samples, which validates the compatibility of the system for both laboratory and point-of-care applications where venous and capillary blood are the primary samples, respectively. The detailed characterization presented in this study legitimates the feasibility of the system for ultrafast and facile measurement of ESR in clinics and diverse off-laboratory settings.Item Open Access Microfluidic measurement of erythrocyte sedimentation rate and monitoring of erytrocyte aggregation(Chemical and Biological Microsystems Society, 2016) Isiksacan, Ziya; Elbuken, ÇağlarWe developed a novel microfluidic opto-electro-mechanical system and performed ultrafast, cheap, and low-sample volume measurement of erythrocyte sedimentation rate (ESR) from erythrocyte aggregation (EA). We also showed EA dynamics in real-time during measurements.Item Open Access Rapid and alternative fabrication method for microfluidic paper based analytical devices(Elsevier B.V., 2016) Malekghasemi, S.; Kahveci, E.; Duman, M.A major application of microfluidic paper-based analytical devices (µPADs) includes the field of point-of-care (POC) diagnostics. It is important for POC diagnostics to possess properties such as ease-of-use and low cost. However, µPADs need multiple instruments and fabrication steps. In this study, two different chemicals (Hexamethyldisilazane and Tetra-ethylorthosilicate) were used, and three different methods (heating, plasma treatment, and microwave irradiation) were compared to develop µPADs. Additionally, an inkjet-printing technique was used for generating a hydrophilic channel and printing certain chemical agents on different regions of a modified filter paper. A rapid and effective fabrication method to develop µPADs within 10 min was introduced using an inkjet-printing technique in conjunction with a microwave irradiation method. Environmental scanning electron microscope (ESEM) and x-ray photoelectron spectroscopy (XPS) were used for morphology characterization and determining the surface chemical compositions of the modified filter paper, respectively. Contact angle measurements were used to fulfill the hydrophobicity of the treated filter paper. The highest contact angle value (141°±1) was obtained using the microwave irradiation method over a period of 7 min, when the filter paper was modified by TEOS. Furthermore, by using this method, the XPS results of TEOS-modified filter paper revealed Si2p (23%) and Si-O bounds (81.55%) indicating the presence of Si–O–Si bridges and Si(OEt) groups, respectively. The ESEM results revealed changes in the porous structures of the papers and decreases in the pore sizes. Washburn assay measurements tested the efficiency of the generated hydrophilic channels in which similar water penetration rates were observed in the TEOS-modified filter paper and unmodified (plain) filter paper. The validation of the developed µPADs was performed by utilizing the rapid urease test as a model test system. The detection limit of the developed µPADs was measured as 1 unit ml−1 urease enzyme in detection zones within a period of 3 min. The study findings suggested that a combination of microwave irradiation with inkjet-printing technique could improve the fabrication method of µPADs, enabling faster production of µPADs that are easy to use and cost-effective with long shelf lives.