Browsing by Author "Kurc, O."
Now showing 1 - 6 of 6
Results Per Page
Sort Options
Item Open Access Multi-point single-antenna sensing enabled by wireless nested split-ring resonator sensors(Institute of Electrical and Electronics Engineers Inc., 2016) Ozbey, B.; Ertürk, V. B.; Kurc, O.; Altintas, A.; Demir, Hilmi VolkanIn this paper, simultaneous multi-point wireless sensing is proposed and demonstrated via multiple sensors in nested split-ring resonator (NSRR) geometry coupled to a single illuminator antenna. In this passive multi-point sensing system, each probe in the sensor array is assigned a non-overlapping spectral interval for frequency shift in response to local mechanical loading around a unique operating resonance frequency in the band of the antenna. Here, it is shown that the antenna is capable of capturing the responses from all probes in a single frequency sweep. Furthermore, the inter-coupling between the array elements and the effect of antenna illumination on the coupling are experimentally investigated in a systematic way. In addition, as a proof-of-concept real-life application in structural health monitoring, two NSRR sensors are located inside a concrete beam to monitor the strain forming on reinforcing bars, and this dual-probe system is demonstrated to record strain simultaneously via both of the embedded probes.Item Open Access Wireless displacement sensing enabled by metamaterial probes for remote structural health monitoring(Multidisciplinary Digital Publishing Institute, 2014-01-17) Ozbey, B.; Unal, E.; Ertugrul, H.; Kurc, O.; Puttlitz, C. M.; Erturk, V. B.; Altintas, A.; Demir, Hilmi VolkanWe propose and demonstrate a wireless, passive, metamaterial-based sensor that allows for remotely monitoring submicron displacements over millimeter ranges. The sensor comprises a probe made of multiple nested split ring resonators (NSRRs) in a double-comb architecture coupled to an external antenna in its near-field. In operation, the sensor detects displacement of a structure onto which the NSRR probe is attached by telemetrically tracking the shift in its local frequency peaks. Owing to the NSRR's near-field excitation response, which is highly sensitive to the displaced comb-teeth over a wide separation, the wireless sensing system exhibits a relatively high resolution (<1 mu m) and a large dynamic range (over 7 mm), along with high levels of linearity (R-2 > 0.99 over 5 mm) and sensitivity (>12.7 MHz/mm in the 1-3 mm range). The sensor is also shown to be working in the linear region in a scenario where it is attached to a standard structural reinforcing bar. Because of its wireless and passive nature, together with its low cost, the proposed system enabled by the metamaterial probes holds a great promise for applications in remote structural health monitoring.Item Open Access Wireless Measurement of Elastic and Plastic Deformation by a Metamaterial-Based Sensor(2014-10-20) Ozbey, B.; Demir, Hilmi Volkan; Kurc, O.; Erturk, V. B.; Altintas, A.We report remote strain and displacement measurement during elastic and plastic deformation using a metamaterial-based wireless and passive sensor. The sensor is made of a comb-like nested split ring resonator (NSRR) probe operating in the near-field of an antenna, which functions as both the transmitter and the receiver. The NSRR probe is fixed on a standard steel reinforcing bar (rebar), and its frequency response is monitored telemetrically by a network analyzer connected to the antenna across the whole stress-strain curve. This wireless measurement includes both the elastic and plastic region deformation together for the first time, where wired technologies, like strain gauges, typically fail to capture. The experiments are further repeated in the presence of a concrete block between the antenna and the probe, and it is shown that the sensing system is capable of functioning through the concrete. The comparison of the wireless sensor measurement with those undertaken using strain gauges and extensometers reveals that the sensor is able to measure both the average strain and the relative displacement on the rebar as a result of the applied force in a considerably accurate way. The performance of the sensor is tested for different types of misalignments that can possibly occur due to the acting force. These results indicate that the metamaterial-based sensor holds great promise for its accurate, robust and wireless measurement of the elastic and plastic deformation of a rebar, providing beneficial information for remote structural health monitoring and post-earthquake damage assessment.Item Open Access A wireless metamaterial-inspired passive rotation sensor with submilliradian resolution(Institute of Electrical and Electronics Engineers, 2018) Gargari, Ali Maleki; Özbey, Burak; Demir, Hilmi Volkan; Altıntaş, Ayhan; Albostan, U.; Kurc, O.; Ertürk, Vakur B.A novel passive wireless rotation sensing system with high levels of sensitivity and resolution is proposed and demonstrated for measuring elastic-region bending in materials such as steel. This system is composed of a transceiver antenna and a double-plate sensor in the form of an inter-digital configuration, which does not incorporate any active component. The sensor exhibits a large rotation resolution of 20μ -rad, an excellent sensitivity of 28 MHz/° in average, and a large linear dynamic range of approximately 40°. In operation, as a result of the relative rotation between the plates of the sensor, the operating resonance frequency of the system is shifted. This is read out and tracked in the S11 response of the transceiver antenna from which the rotation angle is determined. The prototype is designed for microwave regime and it is suitable for measuring very small angles (10-4 10-5 rad). Critical figures-of-merit of the sensor including sensitivity, dynamic range, and resolution are assessed via systematic measurements, and the validity of resolution experiment is verified by employing digital image correlation method for 2-D measurements.Item Open Access Wireless monitoring of a structural beam to be used for post-earthquake damage assessment(IEEE, 2018-05-06) Özbey, B.; Kurc, O.; Demir, Hilmi Volkan; Ertürk, Vakur B.; Altıntaş, AyhanWireless monitoring of a standard reinforced concrete beam is shown in a simply supported beam experiment. The passive nested split-ring resonator (NSRR) probes are attached on the reinforcing bars (rebars) within the beam, and an antenna interrogates the probes from outside the beam. The results of the experiment show that the plastic deformation region strain/displacement can be detected by the wireless sensing system. The data collected by the system constitutes an important input for the assessment of the damage that can be observed after earthquakes.Item Open Access Wireless sensing in complex electromagnetic media: construction materials and structural monitoring(Institute of Electrical and Electronics Engineers Inc., 2015) Özbey, B.; Demir, Hilmi Volkan; Kurc, O.; Ertürk, V. B.; Altıntaş, A.In this paper, wireless sensing in the presence of complex electromagnetic media created by combinations of reinforcing bars and concrete is investigated. The wireless displacement sensing system, primarily designed for use in structural health monitoring (SHM), is composed of a comb-like nested split-ring resonator (NSRR) probe and a transceiver antenna. Although each complex medium scenario is predicted to have a detrimental effect on sensing in principle, it is demonstrated that the proposed sensor geometry is able to operate fairly well in all scenarios except one. In these scenarios that mimic real-life SHM, it is shown that this sensor exhibits a high displacement resolution of 1 μm, a good sensitivity of 7 MHz/mm in average, and a high dynamic range extending over 20 mm. For the most disruptive scenario of placing concrete immediately behind NSRR, a solution based on employing a separator behind the probe is proposed to overcome the handicaps introduced by the medium. In order to obtain a one-to-one mapping from the measured frequency shift to the displacement, a numerical fit is proposed and used. The effects of several complex medium scenarios on this fit are discussed. These results indicate that the proposed sensing scheme works well in real-life SHM applications. © 2001-2012 IEEE.