Browsing by Keywords "Etching"
Now showing items 1-16 of 16
-
Analysis of electrical characteristics and magnetic field dependences of YBCO step edge and bicrystal grain boundary junctions for rf-SQUID applications
(Institute of Physics, 2004)The dc characteristics and magnetic field dependences of Y-Ba-Cu-O bicrystal grain boundary junctions (BGBJs) and step edge junctions (SEJs) were investigated for fabrication of rf-SQUIDs. Test junctions with up to 8 μm ... -
A combinatorial buffered oxide etching method for high-power cladding light stripper
(Institute of Electrical and Electronics Engineers Inc., 2019)High-power fiber lasers have been applied in many areas due to their advantages such as high beam quality, compact structure, flexibility and high efficiency. However, the absorption of the pump light is limited and a ... -
Dependence of the substrate structure and the film growth at the junction of YBCO SEJ rf-SQUIDs on the IBE process and effects on the SQUID's characteristics
(Elsevier, 2002)Step edge junction (SEJ) rf-SQUIDs were made of 200 nm thick YBCO films on LaAlO3(100) substrates using pulsed laser deposition technique. The steps on the substrates were developed using a combination of stationary and ... -
Dual-color ultraviolet metal-semiconductor-metal AlGaN photodetectors
(AIP Publishing LLC, 2006)Backilluminated ultraviolet metal-semiconductor-metal photodetectors with different spectral responsivity bands were demonstrated on a single Alx Ga1-x N heterostructure. This was accomplished by the incorporation of an ... -
Effect of the superconductivity transition on the response of YBCO edge transition bolometers
(2003)Dependence of the phase and magnitude of the response of Y-Ba-Cu-O edge transition bolometers on the superconducting transition is studied. The responses of both large and small area devices were investigated and several ... -
The effects of surface treatment on optical and vibrational properties of stain-etched silicon
(Pergamon Press, 1995)The effects of surface treatment on optical and vibrational properties of porous silicon. (por-Si) layers grown on p-type Si wafers by electroless etching technique were studied by FTIR spectroscopy and photoluminescence ... -
High-performance solar-blind AlGaN photodetectors
(IEEE, 2004)High-performance aluminum gallium nitride (AlGaN)-based solar-blind (SB) photodetectors were demonstrated using different device structures. The Al x-Ga1-xN layers structure were grown by metalorganic chemical vapor ... -
High-speed characterization of solar-blind AlxGa 1-xN p-i-n photodiodes
(Institute of Physics, 2004)We report on the temporal pulse response measurements of solar-blind AlxGa1-xN-based heterojunction p-i-n photodiodes. High-speed characterization of the fabricated photodiodes was carried out at 267 nm. The bandwidth ... -
Highly doped silicon micromachined photonic crystals
(IEEE, Piscataway, NJ, United States, 2000)Summary form only given. Photonic crystals are periodic structures with the property of reflecting the electromagnetic (EM) waves in all directions within a certain frequency range. These structures can be used to control ... -
Investigation of the effect of thermal cycling on the device performance of YBa2Cu3O7-δ DC-SQUIDs
(2007)We investigated the effect of thermal cycling on the operational performance of YBa2Cu3O7-δ (YBCO) direct current superconducting quantum interference devices (DC-SQUIDs) fabricated onto 24°SrTiO3 (STO) bicrystal substrates. ... -
Junction characteristics and magnetic field dependencies of low noise step edge junction Rf-SQUIDs for unshielded applications
(IEEE, 2003-06)Step edge grain boundary (GB) junctions and rf-SQUIDs have been made using pulsed laser deposited Y-Ba-Cu-O films on crystalline LaAlO3 substrates. The steps were developed using various ion-beam etching processes resulting ... -
Microfabricated ultrasonic transducers: towards robust models and immersion devices
(IEEE, 1996-11)The successful fabrication of ultrasonic immersion transducers is reported. Transducers are observed to operate from 1 MHz to 20 MHz in water, with the frequency range limited by electronics, not the transducers. Transmission ... -
Physics and applications of photonic crystals
(Nanotechnology Research Center NANOTAM, 2004)In this article, we investigate how the photonic band gaps and the variety of band dispersions of photonic crystals can be utilized for various applications and how they further give rise to completely novel optical ... -
A simple approach for the fabrication of 3D microelectrodes for impedimetric sensing
(Institute of Physics Publishing, 2015)In this paper, we present a very simple method to fabricate three-dimensional (3D) microelectrodes integrated with microfluidic devices. We form the electrodes by etching a microwire placed across a microchannel. For precise ... -
Slicing crystalline silicon wafer by deep subsurface laser processing and selective chemical etching
(Institute of Electrical and Electronics Engineers Inc., 2019)In this work, we demonstrate use of laser-induced silicon slicing (LASIS) technique to fabricate crystalline silicon (c-Si) slices [1]. In LASIS method, a nanosecond-pulsed fiber laser operating at 1.55 μm wavelength, ... -
Terahertz Bandpass Frequency Selective Surfaces on Glass Substrates Using a Wet Micromachining Process
(Springer New York LLC, 2017)This paper presents terahertz (THz) frequency selective surfaces (FSS) implemented on glass substrate using standard microfabrication techniques. These FSS structures are designed for frequencies around 0.8 THz. A fabrication ...