Browsing by Keywords "Dispersions"
Now showing items 1-17 of 17
-
2D material liquid crystals for optoelectronics and photonics
(Royal Society of Chemistry, 2017)The merging of the materials science paradigms of liquid crystals and 2D materials promises superb new opportunities for the advancement of the fields of optoelectronics and photonics. In this review, we summarise the ... -
33-fs Yb-fiber laser comb locked to Cs-atomic clock
(IEEE, 2013)Despite the prevalence of fiber frequency combs around 1.5 μm, few fully stabilized frequency combs have been demonstrated around 1.0 μm, despite the generally superior performance of Yb-fiber lasers compared to Er-fiber ... -
All-fiber all-normal dispersion laser with a fiber-based Lyot filter
(Optical Society of America, 2010-04-15)We propose the use of a short section of polarization-maintaining fiber as a birefringent medium to construct an all-fiber Lyot filter inside the cavity of a fiber laser. This allows mode-locked operation of an all-fiber ... -
All-normal-dispersion fiber lasers for frequency metrology
(Optical Society of America, 2011)Development of an all-normal-dispersion Yb-doped fiber laser-based frequency comb is reported. Repetition-frequency stabilization to the cesium standard, amplitude and phase noise measurements indicate low-noise performance. ... -
Asymmetric transmission in prisms using structures and materials with isotropic-type dispersion
(Optical Society of America, 2015)It is demonstrated that strong asymmetry in transmission can be obtained at the Gaussian beam illumination for a single prism based on a photonic crystal (PhC) with isotropic-type dispersion, as well as for its analog made ... -
Collective modes in a bilayer dipolar fermi gas and the dissipationless drag effect
(Springer, 2013)We consider the collective modes of a bilayer dipolar Fermi system in which the particles interact via long range (∼1/r 3) interaction. Assuming that each layer has a background flow which varies little and that the dynamics ... -
Core/shell-structured, covalently bonded TiO2/poly(3,4-ethylenedioxythiophene) dispersions and their electrorheological response: The effect of anisotropy
(Royal Society of Chemistry, 2015)As a new electrorheological (ER) material, core/shell nanorods composed of a titania core and conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) shell were prepared via covalent bonding to achieve a thin polymer ... -
Effect of in-material losses on terahertz absorption, transmission, and reflection in photonic crystals made of polar dielectrics
(A I P Publishing LLC, 2015)The effect of the material absorption factor on terahertz absorption (A), transmittance (T), and reflectance (R) for slabs of PhC that comprise rods made of GaAs, a polar dielectric, is studied. The main goal was to ... -
Filterless all-normal dispersion fiber laser
(IEEE, 2009)We demonstrate mode-locked operation of an allnormal dispersion Yb-fiber oscillator without the use of bulk bandpass filter. A section of PM-fiber incorporated into the cavity acts as a filter, paving the way towards an ... -
Fine-tuning the dispersion and the mobility of BaO domains on NO x storage materials via TiO2 anchoring sites
(American Chemical Society, 2010)In an attempt to control the surface dispersion and the mobility of BaO domains on NOx storage materials, TiO2/TiOx anchoring sites were introduced on/inside the conventional γ-Al 2O3 support matrix. BaO/TiO2/Al 2O3 ternary ... -
Numerical analysis of mixing performance in sinusoidal microchannels based on particle motion in droplets
(Springer Verlag, 2015)This numerical study was conducted to analyze and understand the parameters that affect the mixing performance of droplet-based flow in sinusoidal microfluidic channels. Finite element analysis was used for modeling fluid ... -
Rayleigh-bloch waves in CMUT arrays
(Institute of Electrical and Electronics Engineers Inc., 2014)Using the small-signal electrical equivalent circuit of a capacitive micromachined ultrasonic transducer (CMUT) cell, along with the self and mutual radiation impedances of such cells, we present a computationally efficient ... -
Stable and efficient colour enrichment powders of nonpolar nanocrystals in LiCl
(Royal Society of Chemistry, 2015)In this work, we propose and develop the inorganic salt encapsulation of semiconductor nanocrystal (NC) dispersion in a nonpolar phase to make a highly stable and highly efficient colour converting powder for colour ... -
Synthesis and characterization of secondary-amine-functional microparticles
(John Wiley & Sons, Inc., 2004)Secondary-amine-functional microparticles were prepared in the range of 50-250 μm through the suspension polymerization of styrene, divinylbenzene (DVB), and 2-(tert-butylamino)ethyl methacrylate (tBAEMA). This study focused ... -
Theoretical study of hydrogen adsorption in Ti-decorated capped carbon nanotube
(Taylor and Francis Ltd., 2017)We present ab initio study using dispersion-corrected density functional theory calculations to investigate the hydrogen interaction with Ti-coated, one end closed, single-walled carbon nanotube (SWCNT). Our results ... -
Tkachenko modes of the square vortex lattice in a two-component bose-einstein condensate
(2006)We study Tkachenko modes of the square vortex lattice of a two-component Bose-Einstein condensate (BEC) in the mean-field quantum Hall regime, considering the coupling of these modes with density excitations. We derive the ... -
Ultrashort pulse formation and evolution in mode-locked fiber lasers
(2011)Passive mode-locking in fiber lasers is investigated by numerical and experimental means. A non-distributed scalar model solving the nonlinear Schrödinger equation is implemented to study the starting behavior and intra-cavity ...
