Osmanoğlu, SinanÖzbay, Ekmel2022-02-152022-02-152021-01-190894-3370http://hdl.handle.net/11693/77367This paper describes an air cavity quad-flat no-leads (QFN) over-molded plastic packaged cascode broadband GaN LNA Monolithic Microwave Integrated Circuit (MMIC) with resistive feedback fabricated with 0.25 μm GaN HEMT technology. The single stage QFN packaged GaN LNA MMIC achieves a bandwidth of 0.03–2.6 GHz with a typical gain of 11.5 dB and less than 1.5 dB noise figure. The low noise amplifier (LNA) design is based on a model of a concept transistor, the cascode transistor used in the design, that has not been fabricated previously. The concept transistor is fabricated for the first time along with the GaN LNA MMIC. The fabricated GaN LNA MMIC is housed in a 12-lead 3 × 3 mm2 air cavity QFN over-molded plastic package and mounted on an application board. The measurements taken with the application board represent a good convergence with the design that is based on a concept transistor model. The measurement results and 50 Ω internal matching on both ports without the need for additional matching components make this LNA attractive for many applications.EnglishBroadbandFeedback amplifiersGaNLNAMMICNoise modelArticle10.1002/jnm.2859