Tunç, Celal Alp2016-01-082016-01-082009http://hdl.handle.net/11693/14871Ankara : The Department of Electrical and Electronics Engineering and the Institute of Engineering and Science of Bilkent University, 2009.Thesis (Ph.D.) -- Bilkent University, 2009.Includes bibliographical references leaves 123-135.Multiple-input-multiple-output (MIMO) wireless communication systems have been attracting huge interest, since a boost in the data rate was shown to be possible, using multiple antennas both at the transmitter and receiver. It is obvious that the electromagnetic effects of the multiple antennas have to be included in the wireless channel for an accurate system design, though they are often neglected by the early studies. In this thesis, the MIMO channel is investigated from an electromagnetics point of view. A full-wave channel model based on the method of moments solution of the electric field integral equation is developed and used in order to evaluate the MIMO channel matrix accurately. The model is called the channel model with electric fields (MEF) and it calculates the exact fields via the radiation integrals, and hence, it is rigorous except the random scatterer environment. The accuracy of the model is further verified by the measurement results. Thus, it is concluded that MEF achieves the accuracy over other approaches which are incapable of analyzing antenna effects in detail. Making use of the presented technique, MIMO performance of printed dipole arrays is analyzed. Effects of the electrical properties of printed dipoles on the MIMO capacity are explored in terms of the relative permittivity and thickness of the dielectric material. Appropriate dielectric slab configurations yielding high capacity printed dipole arrays are presented. The numerical efficiency of the technique (particularly for freestanding and printed dipoles) allows analyzing MIMO performance of arrays with large number of antennas, and high performance array design in conjunction with well-known optimization tools. Thus, MEF is combined with particle swarm optimization (PSO) to design MIMO arrays of dipole elements for superior capacity. Freestanding and printed dipole arrays are analyzed and optimized, and the adaptive performance of printed dipole arrays in the MIMO channel is investigated. Furthermore, capacity achieving input covariance matrices for different types of arrays are obtained numerically using PSO in conjunction with MEF. It is observed that, moderate capacity improvement is possible for small antenna spacing values where the correlation is relatively high, mainly utilizing nearly full or full covariance matrices. Otherwise, the selection of the diagonal covariance is almost the optimal solution.MIMO performance of printed rectangular patch arrays is analyzed using a modified version of MEF. Various array configurations are designed, manufactured, and their MIMO performance is measured in an indoor environment. The channel properties, such as the power delay profile, mean excess delay and delay spread, are obtained via measurements and compared with MEF results. Very good agreement is achieved.xx, 135 leaves, illustrations, graphsEnglishinfo:eu-repo/semantics/openAccessMIMOoptimal input covarianceindoor MIMO measurementsparticle swarm optimization (PSO)microstrip patch arraysmicrostrip dipole arraysplanar printed arraysmutual couplingmethod of moments (MoM)TK5103.2 .T85 2009MIMO systems.Wireless communication systems.Adaptive antennas.Thesis