Lan, Y.Yang, G.Zhao, Y.Liu, Y.Demir, Abdullah2023-02-142023-02-142022-09-150169-4332http://hdl.handle.net/11693/111277Passivation of dangling bonds at the cleaved mirror facet and its durability are fundamental features of semiconductor lasers to obtain reliable operation with a long device lifetime. The high non-radiative recombination activity of the surface states needs to be controlled to prevent the Fermi level pinning before the deposition of mirror coating materials. Here, we report the incorporation of plasma cleaning of the facet and ZnO film as a passivation layer for the fabrication of high-power semiconductor lasers. The Argon plasma cleaning process was investigated to eliminate surface contamination without damaging the cavity surface. The ZnO passivation films were systematically studied by varying the chamber pressure and sputtering power of the radio frequency (RF) sputter coating process. We obtained homogeneous and dense ZnO films with high surface quality and optical absorption coefficient of zero. By incorporating the optimum plasma cleaning and passivation layer parameters, GaAs-based laser devices with significantly improved catastrophic optical mirror damage (COMD) power were achieved. COMD threshold was increased from 11.9 W to 20.7 W. The life test results demonstrate no failure for facet cleaned and passivated devices for more than 500 h, confirming the long-term effectiveness of the process for actual device integration.EnglishFacet passivationHigh reliabilityLaser diodesArticle10.1016/j.apsusc.2022.1535061873-5584