Browsing by Subject "Transmission bandwidth"

Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    Binary coded identification of industrial chemical vapors with an optofluidic nose
    (OSA - The Optical Society, 2016) Adamu, A. I.; Ozturk, F. E.; Bayındır, Mehmet
    An artificial nose system for the recognition and classification of gas-phase analytes and its application in identifying common industrial gases is reported. The sensing mechanism of the device comprises the measurement of infrared absorption of volatile analytes inside the hollow cores of optofluidic Bragg fibers. An array of six fibers is used, where each fiber targets a different region of the mid-infrared in the range of 2-14 ìm with transmission bandwidths of about 1-3 μm. The quenching in the transmission of each fiber due to the presence of analyte molecules in the hollow core is measured separately and the cross response of the array allows the identification of virtually any volatile organic compound (VOC). The device was used for the identification of seven industrial VOC vapors with high selectivity using a standard blackbody source and an infrared detector. The array response is registered as a unique six digit binary code for each analyte by assigning a threshold value to the fiber transmissions. The developed prototype is a comprehensive and versatile artificial nose that is applicable to a wide range of analytes.
  • Thumbnail Image
    ItemOpen Access
    Terahertz Bandpass Frequency Selective Surfaces on Glass Substrates Using a Wet Micromachining Process
    (Springer New York LLC, 2017) Ramzan, Mehrab; Khan, Talha Masood; Bolat, Sami; Nebioglu, Mehmet Ali; Altan, Hakan; Okyay, Ali Kemal; Topallı, Kağan
    This paper presents terahertz (THz) frequency selective surfaces (FSS) implemented on glass substrate using standard microfabrication techniques. These FSS structures are designed for frequencies around 0.8 THz. A fabrication process is proposed where a 100-μm-thick glass substrate is formed through the HF etching of a standard 500-μm-thick low cost glass wafer. Using this fabrication process, three separate robust designs consisting of single-layer FSS are investigated using high-frequency structural simulator (HFSS). Based on the simulation results, the first design consists of a circular ring slot in a square metallic structure on top of a 100-μm-thick Pyrex glass substrate with 70% transmission bandwidth of approximately 0.07 THz, which remains nearly constant till 30° angle of incidence. The second design consists of a tripole structure on top of a 100-μm-thick Pyrex glass substrate with 65% transmission bandwidth of 0.035 THz, which remains nearly constant till 30° angle of incidence. The third structure consists of a triangular ring slot in a square metal on top of a 100-μm-thick Pyrex glass substrate with 70% transmission bandwidth of 0.051 THz, which remains nearly constant up to 20° angle of incidence. These designs show that the reflections from samples can be reduced compared to the conventional sample holders used in THz spectroscopy applications, by using single layer FSS structures manufactured through a relatively simple fabrication process. Practically, these structures are achieved on a fabricated 285-μm-thick glass substrate. Taking into account the losses and discrepancies in the substrate thickness, the measured results are in good agreement with the electromagnetic simulations. © 2017, Springer Science+Business Media New York.