Browsing by Subject "Silver alloys"

Now showing 1 - 4 of 4

Open Access
Evaluate of braze joint strength and microstructure characterize of titanium-CP with Ag-based filler alloy
(2012) Ganjeh, E.; Sarkhosh H.; Khorsand H.; Sabet H.; Dehkordi, E.H.; Ghaffari, M.
This research investigates the influences of brazing parameters (temperature and time) on microstructures and the mechanical properties of commercially pure (CP) titanium sheet when it is brazed with CBS34 (Ag-20Cu-22Zn-24Cd) braze filler foil. Brazing was performed in a conventional atmosphere control furnace. The brazing temperatures and holding times employed in this study were 800-870°C and 10-20min, respectively. The qualities of the brazed joints were evaluated by ultrasonic test and the microstructure and phase constitution of the bonded joints were analyzed by means of metallography, scanning electron microscope (SEM) and X-ray diffraction (XRD). The mechanical properties of brazed joints were evaluated by microhardness and shear tests. The diffusion between Ti, Ag, Cu, Zn and Cd from substrate and braze alloy, developed a strong reaction between each other. A number of intermetallic phases, such as TiCu and Ti2Cu in the Ag-Zn solid solution matrix have been identified especially at 870°C - 20min. Both the brazing temperature and the holding time are critical factors for controlling the microstructure and hence the mechanical properties of the brazed joints. The optimum brazing parameters was achieved at 870°C - 20min. Based on the shear test result, all cracks propagate along the brittle intermetallic compounds like Ti2Cu in the reaction layer which typically are composed of quasi-cleavage (Ag-Zn matrix) and brittle appearance. © 2012 Elsevier Ltd.
Open Access
Investigation on braze joint strength and microstructure of Ti-CP with Ag and Ti base filler alloys
(American Welding Society, 2012) Ganjeh, E.; Khorsand H.; Sarkhosh H.; Ghaffari, M.; Sabet H.; Dehkordi, E.H.
This research investigates influences of brazing parameters (brazing alloy, temperature and time) on microstructures and mechanical properties of a commercially pure (CP) titanium sheet which is brazed with CBS 34 (Ag-based) and STEMET 1228 (Ti-based) braze-filler foils. Brazing was performed in a conventional inert furnace at temperature ranges of 800-870°C and 10-30 minutes for holding times. Qualities of the brazed joints were evaluated by ultrasonic testing, and then, microstructure and phase constitution of the bonded joints were analyzed by means of metallography, scanning electron microscope (SEM), and X-ray diffraction (XRD). Mechanical properties of brazed joints were evaluated by shear testing. Diffusion of titanium from substrate to filler alloy developed a strong reaction between them. A number of phases such as TiCu, Ti 2Cu, TiAg, Ag-Zn solid solution matrix (for Ag-based brazed samples) and Ti 2Cu, (Ti,Zr) 2Ni, Zr 2Cu (for Ti-based brazed samples) have been identified. The optimum brazing parameters were achieved at a temperature of 870 °C-20 min for CBS 34 and 870 °C-30 min for STEMET 1228. The specimen using STEMET 1228 braze alloy demonstrates best bonding strength (equal to Ti-CP tensile strength). Copyright 2012 ASM International® All rights reserved.
Open Access
Novel high-K inverse silver oxide phases of SiO2, GeO2, SnO2, and their alloys
(Elsevier, 2006) Sevik, C.; Bulutay, C.
The recently reported inverse silver oxide phase of SiO2 possesses a high dielectric constant as well as lattice constant compatibility to Si. We explore the closely related oxides, GeO2, SnO2 with the same inverse silver oxide structure using ab initio density functional theory within the local density approximation (LDA). According to the phonon dispersion curves, both these structures are computed to be unstable. On the other hand, their alloys Si0.5 Ge0.5 O2, Si0.5 Sn0.5 O2, and Ge0.5 Sn0.5 O2 are stable with higher dielectric constants than that of SiO2 in the same phase. Their first-principles elastic constants, electronic band structures and phonon dispersion curves have been obtained with high precision. © 2006 Elsevier Ltd. All rights reserved.
Open Access
Synthesis, characterization and antibacterial investigation of silver-copper nanoalloys
(2011) Taner, M.; Sayar, N.; Yulug I. G.; Süzer, Şefik
Ag-Cu nanoalloys were synthesized by chemical co-reduction of their metal salts in aqueous solution with hydrazine hydrate, in the presence of complexing agent and stabilizer, preventing the oxidation of copper, as revealed by XPS. Their antibacterial behavior was tested against Escherichia coli strains, attesting far better ability of the Ag-Cu compared to Ag-only nanoparticles.