Browsing by Subject "Finite difference time domain method"

Now showing 1 - 17 of 17

Open Access
2D anisotropic photonic crystals of hollow semiconductor nanorod with liquid crystals
(2013) Karaomerlioglu F.; Şimsek, Şevket; Mamedov, Amirullah M.; Özbay, Ekmel
Photonic crystals (PCs) have many applications in order to control light-wave propagation. A novel type of two-dimensional anisotropic PC is investigated band gap and optical properties as a hollow semiconductor nanorod with nematicliquid crystals (LC). The PC structure composed of an anisotropic nematicLC in semiconductor square hollow nanorod is designed using the plane wave expansion (PWE) method and finite-difference time-domain (FDTD) method. It has been used 5CB (4-pentyl-4'-cyanobiphenyl) as LC core, and Tellurium (Te) as square hollow nanorod material.The PC with hollow Tenanorod with nematicLC is compared with the PC with solid Tenanorodand the PC with hollow Tenanorod. © (2013) Trans Tech Publications, Switzerland.
Open Access
An analysis for the broad-band absorption enhancement using plasmonic structures on uncooled infrared detector pixels
(SPIE, 2012-05) Lüleç, S. Z.; Küçük, S. E.; Battal, Enes; Okyay, Ali Kemal; Tanrıkulu, M. Y.; Akın, T.
This paper introduces an analysis on the absorption enhancement in uncooled infrared pixels using resonant plasmon modes in metal structures, and it reports, for the first time in literature, broad-band absorption enhancement using integrated plasmonic structures in microbolometers for unpolarized long-wave IR detection. Different plasmonic structures are designed and simulated on a stack of layers, namely gold, polyimide, and silicon nitride in order to enhance absorption at the long-wave infrared. The simulated structures are fabricated, and the reflectance measurements are conducted using an FTIR Ellipsometer in the 8-12 μm wavelength range. Finite difference time domain (FDTD) simulations are compared to experimental measurement results. Computational and experimental results show similar spectral reflection trends, verifying broad-band absorption enhancement in the spectral range of interest. Moreover, this paper computationally investigates pixel-wise absorption enhancement by plasmonic structures integrated with microbolometer pixels using the FDTD method. Special attention is given during the design to be able to implement the integrated plasmonic structures with the microbolometers without a need to modify the pre-determined microbolometer process flow. The optimized structure with plasmonic layer absorbs 84 % of the unpolarized radiation in the 8-12 μm spectral range on the average, which is a 22 % increase compared to a reference structure with no plasmonic design. Further improvement may be possible by designing multiply coupled resonant structures.
Open Access
Band gap and optical transmission in the Fibonacci type one-dimensional A5B6C7 based photonic crystals
(Wiley-VCH Verlag, 2015) Simsek S.; Koc, H.; Palaz S.; Oltulu, O.; Mamedov, A. M.; Özbay, Ekmel
In this work, we present an investigation of the optical properties and band structure calculations for the photonic crystal structures (PCs) based on one-dimensional (1D) photonic crystal. Here we use 1D A5B6C7(A:Sb; B:S,Se; C:I) based layers in air background. We have theoretically calculated photonic band structure and optical properties of A5B6C7(A:Sb; B:S,Se; C:I) based PCs. In our simulation, we employed the finite-difference time domain (FDTD) technique and the plane wave expansion method (PWE) which implies the solution of Maxwell equations with centered finite-difference expressions for the space and time derivatives. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Open Access
Broadband circular polarizer based on high-contrast gratings
(Optical Society of America, 2012-05-30) Mutlu, M.; Akosman, A. E.; Özbay, Ekmel
A circular polarizer, which is composed of periodic and two-dimensional dielectric high-contrast gratings, is designed theoretically such that a unity conversion efficiency is achieved at λ0 = 1.55 μm. The operation is obtained by the achievement of the simultaneous unity transmission of transverse magnetic and transverse electric waves with a phase difference of π/2, meaning that an optimized geometrical anisotropy is accomplished. By the utilization of the rigorous coupled-wave analysis and finite-difference time-domain methods, it is shown that a percent bandwidth of ∼50% can be achieved when the operation bandwidth is defined as the wavelengths for which the conversion efficiency exceeds 0.9.
Open Access
Broadband quarter-wave plates at near-infrared using high-contrast gratings
(2013) Mutlu, M.; Akosman, A.E.; Kurt G.; Gokkavas, M.; Özbay, Ekmel
In this paper, we report the theoretical and experimental possibility of achieving a quarter-wave plate regime by using high-contrast gratings, which are binary, vertical, periodic, near-wavelength, and two-dimensional high refractive index gratings. Here, we investigate the characteristics of two distinct designs, the first one being composed of silicon-dioxide and silicon, and the second one being composed of silicon and sapphire. The suggested quarter-wave plate regime is achieved by the simultaneous optimization of the transverse electric and transverse magnetic transmission coefficients, TTE and TTM, respectively, and the phase difference between these transmission coefficients, such that |TTM| ≅ |TTE| and \TTM - \TTE ≅ -/2. As a result, a unity circular polarization conversion efficiency is achieved atλ0 = 1.55 μm for both designs. For the first design, we show the obtaining of unity conversion efficiency by using a theoretical approach, which is inspired by the periodic waveguide interpretation, and rigorous coupled-wave analysis (RCWA). For the second design, we demonstrate the unity conversion efficiency by using the results of finite-difference time-domain (FDTD) simulations. Furthermore, the FDTD simulations, where material dispersion is taken into account, suggest that an operation percent bandwidth of 51% can be achieved for the first design, where the experimental results for the second design yield a bandwidth of 33%. In this context, we define the operation regime as the wavelength band for which the circular conversion efficiency is larger than 0.9. © 2013 SPIE.
Open Access
Compact wavelength de-multiplexer design using slow light regime of photonic crystal waveguides
(Optical Society of American (OSA), 2011) Akosman, A.E.; Mutlu, M.; Kurt H.; Özbay, Ekmel
We demonstrate the operation of a compact wavelength demultiplexer using cascaded single-mode photonic crystal waveguides utilizing the slow light regime. By altering the dielectric filling factors of each waveguide segment, we numerically and experimentally show that different frequencies are separated at different locations along the waveguide. In other words, the beams of different wavelengths are spatially dropped along the transverse to the propagation direction. We numerically verified the spatial shifts of certain wavelengths by using the two-dimensional finite-difference time-domain method. The presented design can be extended to de-multiplex more wavelengths by concatenating additional photonic crystal waveguides with different filling factors. © 2011 Optical Society of America.
Open Access
Direct imaging of localized surface plasmon polaritons
(Optical Society of America, 2011-08) Balcı, Sinan; Karademir, Ertuğrul; Kocabaş, Coşkun; Aydınlı, Atilla
In this Letter, we report on dark field imaging of localized surface plasmon polaritons (SPPs) in plasmonic waveguiding bands formed by plasmonic coupled cavities. We image the light scattered from SPPs in the plasmonic cavities excited by a tunable light source. Tuning the excitation wavelength, we measure the localization and dispersion of the plasmonic cavity mode. Dark field imaging has been achieved in the Kretschmann configuration using a supercontinuum white-light laser equipped with an acoustooptic tunable filter. Polarization dependent spectroscopic reflection and dark field imaging measurements are correlated and found to be in agreement with finite-difference time-domain calculations.
Open Access
Interpolation techniques to improve the accuracy of the plane wave excitations in the finite difference time domain method
(Wiley-Blackwell Publishing, Inc., 1997-11) Oğuz, U.; Gürel, Levent
The importance of matching the phase velocity of the incident plane wave to the numerical phase velocity imposed by the numerical dispersion of the three-dimensional (3-D) finite difference time domain (FDTD) grid is demonstrated. In separate-field formulation of the FDTD method, a plane wave may be introduced to the 3-D computational domain either by evaluating closed-form incident-field expressions or by interpolating from a 1-D incident-field array (IFA), which is a 1-D FDTD grid simulating the propagation of the plane wave. The relative accuracies and efficiencies of these two excitation schemes are compared, and it has been shown that higher-order interpolation techniques can be used to improve the accuracy of the IFA scheme, which is already quite efficient.
Open Access
Kesirli fourier dönüşümünün zaman bölgesinde sonlu farklar yöntemine uygulanması
(IEEE, 2010-04) Sayın, I.; Arıkan F.; Arıkan, Orhan
Bilgisayarların hız ve belleklerinin gelişmesi ile birlikte elektromanyetik problemlerin çözümünde saysal yöntemler sıkça kullanılmaya başlanmış ve bu konuda çok sayda araştırma yapılmıştır. Saysal Elektromanyetik yöntemleri genel olarak zaman ve frekans tabanlı yöntemler olarak sınıflandırılabilir. Zaman tabanlı yöntemler geçici tepkilerin ve geniş bantlı problemlerin incelenmesinde kullanışlı olurken, frekans tabanlı yöntemler durağan hal tepkilerin ve dar bantlı problemlerin incelenmesinde en iyi çözümü vermektedir. Her iki yaklaşımın da avantajlarını ön plana çıkarabilecek bir yöntem geliştirilebileceği düşünülmektedir. Uzayda ve/veya zamanda Kesirli Fourier Dönüşümü uygulanarak bazı durumlarda hesaplama karmaşıklığı azaltılabilir. Kesirli Fourier Dönüşümü, sürekli Fourier Dönüşümünün genelleştirilmiş halidir. Son yıllarda bu konu üzerinde çeşitli çalışmalar yapılmakta ve uygulama alanları genişlemektedir. Genel olarak, sinyal işleme ve gürültü süzme gibi alanlarda kullanılmaktadır. Bu çalmada Kesirli Fourier Dönüşümü, ilk kez Maxwell denklemlerine zaman bölgesinde uygulanmış ve elde edilen diferansiyel denklemler sonlu farklar yaklaşımı ile ayrık hale getirilmiştir. Elde edilen ayrık sonlu fark denklemlerinin çözümü için öneriler sunulmuştur.
Open Access
Nanoantenna couplers for metal-insulator-metal waveguide interconnects
(SPIE, 2010) Onbasli, M.C.; Okyay, Ali Kemal
State-of-the-art copper interconnects suffer from increasing spatial power dissipation due to chip downscaling and RC delays reducing operation bandwidth. Wide bandwidth, minimized Ohmic loss, deep sub-wavelength confinement and high integration density are key features that make metal-insulator-metal waveguides (MIM) utilizing plasmonic modes attractive for applications in on-chip optical signal processing. Size-mismatch between two fundamental components (micron-size fibers and a few hundred nanometers wide waveguides) demands compact coupling methods for implementation of large scale on-chip optoelectronic device integration. Existing solutions use waveguide tapering, which requires more than 4λ-long taper distances. We demonstrate that nanoantennas can be integrated with MIM for enhancing coupling into MIM plasmonic modes. Two-dimensional finite-difference time domain simulations of antennawaveguide structures for TE and TM incident plane waves ranging from λ = 1300 to 1600 nm were done. The same MIM (100-nm-wide Ag/100-nm-wide SiO2/100-nm-wide Ag) was used for each case, while antenna dimensions were systematically varied. For nanoantennas disconnected from the MIM; field is strongly confined inside MIM-antenna gap region due to Fabry-Perot resonances. Major fraction of incident energy was not transferred into plasmonic modes. When the nanoantennas are connected to the MIM, stronger coupling is observed and E-field intensity at outer end of core is enhanced more than 70 times. © 2010 SPIE.
Open Access
One and two dimensional LiNbO3 photonic crystals
(IEEE, 2013) Şimşek, Şevket; Mamedov, Amirullah M.; Özbay, Ekmel
In this report, we present an investigation of the optical properties and band structure calculations for the photonic crystal structures (PCs) based on one-dimensional (1D) and two-dimensional (2D) ferroelectric LiNbO3 crystal. Here we use 1D and 2D periodic crystal structure of dielectric rods and layers in air background. We have theoretically calculated photonic band structure and optical properties of 1D and 2D LiNbO3 PCs. Beside, we have calculated affect PBG properties of different parameters such as filling fraction and the shape. In order to get photonic gap map, we have calculated the gaps as a function of radius of the rods. We have also investigated the nature of guided modes in line defect waveguide. In our simulation, we employed the finite-difference time domain (FDTD) technique which implies the solution of Maxwell equations with centered finite-difference expressions for the space and time derivatives. © 2013 IEEE.
Open Access
A plasmonically enhanced pixel structure for uncooled microbolometer detectors
(SPIE, 2013) Erturk O.; Battal, Enes; Kucuk, S.E.; Okyay, Ali Kemal; Akin, T.
This paper introduces a method of broadband absorption enhancement that can be integrated with the conventional suspended microbolometer process with no significant additional cost. The premise of this study is that electric field can be enhanced throughout the structural layer of the microbolometer, resulting in an increase in the absorption of the infrared radiation in the long wave infrared window. A concentric double C-shaped plasmonic geometry is simulated using the FDTD method, and this geometry is fabricated on suspended pixel arrays. Simulation results and FTIR measurements are in good agreement indicating a broadband absorption enhancement in the 8 μm - 12 μm range for LWIR applications. The enhancement is attained using metallic geometries embedded in the structural layer of the suspended microbridge, where the metallic-dielectric interface increases the average absorption of a 35 μm pixel from 67.6% to 80.1%. © 2013 SPIE.
Open Access
SbSI based photonic crystal superlattices: band structure and optics
(IOP, 2015) Şimsek, Ş.; Koç, H.; Palaz, S.; Oltulu, O.; Mamedov, Amirullah M.; Özbay, Ekmel
In this work, we present an investigation of the optical properties and band structure calculations for the photonic crystal structures (PCs) based on one-dimensional (1D)-photonic crystal. Here we use 1D SbSI based layers in air background. We have theoretically calculated the photonic band structure and optical properties of SbSI based PC superlattices. In our simulation, we employed the finite-difference time domain (FDTD) technique and the plane wave expansion method (PWE), which implies the solution of Maxwell equations with centered finite-difference expressions for the space and time derivatives.
Open Access
Slowing surface plasmon polaritons on plasmonic coupled cavities by tuning grating grooves
(American Institute of Physics, 2010-09) Balcı, Sinan; Kocabaş, Aşkın; Kocabaş, Coşkun; Aydınlı, Atilla
We investigate slow surface plasmon polaritons (SPPs) in plasmonic waveguiding bands formed by coupled plasmonic cavities on Moiŕ surfaces. We demonstrate controlling the group velocity and dispersion of the SPPs by varying the depth of the plasmonic Bragg grating groove. Changing the grating depth results in modification of coupling coefficients between the cavities and hence the SPPs group velocity is altered. Variation in the group velocity and dispersion of SPPs can be measured with polarization dependent spectroscopic reflection measurements. Dispersion of SPPs has been calculated by finite-difference time-domain method in agreement with the experimental data.
Open Access
Three-dimensional FDTD modeling of a GPR
(IEEE, 2000) Oğuz, Uğur; Gürel, Levent
The power and flexibility of the Finite-Difference Time-Domain (FDTD) method are combined with the accuracy of the perfectly-matched layer (PML) absorbing boundary conditions to simulate realistic ground-penetrating radar (GPR) scenarios. Three-dimensional geometries containing modes of radar units, buried objects and surrounding environments are simulated. Simulation results are analyzed in detail.
Open Access
Three-dimensional FDTD modeling of a ground-penetrating radar
(IEEE, 2000) Gürel, Levent; Oğuz, U.
The finite-difference time-domain (FDTD) method is used to simulate three-dimensional (3-D) geometries of realistic ground-penetrating radar (GPR) scenarios. The radar unit is modeled with two transmitters and a receiver in order to cancel the direct signals emitted by the two transmitters at the receiver. The transmitting and receiving antennas are allowed to have arbitrary polarizations. Single or multiple dielectric and conducting buried targets are simulated. The buried objects are modeled as rectangular prisms and cylindrical disks. Perfectly-matched layer absorbing boundary conditions are adapted and used to terminate the FDTD computational domain, which contains a layered medium due to the ground-air interface.
Open Access
Understanding the plasmonic properties of dewetting formed Ag nanoparticles for large area solar cell applications
(Optical Society of American (OSA), 2013) Günendi, M.C.; Tanyeli I.; Akgüç G.B.; Bek, A.; Turan, R.; Gülseren O.
The effects of substrates with technological interest for solar cell industry are examined on the plasmonic properties of Ag nanoparticles fabricated by dewetting technique. Both surface matching (boundary element) and propagator (finite difference time domain) methods are used in numerical simulations to describe plasmonic properties and to interpret experimental data. The uncertainty on the locations of nanoparticles by the substrate in experiment is explained by the simulations of various Ag nanoparticle configurations. The change in plasmon resonance due to the location of nanoparticles with respect to the substrate, interactions among them, their shapes, and sizes as well as dielectric properties of substrate are discussed theoretically and implications of these for the experiment are deliberated. ©2013 Optical Society of America.