Browsing by Subject "Contact angle"

Now showing 1 - 11 of 11

Open Access
Characterization of denture acrylic resin surfaces modified by glow discharges
(Sage Publications, Inc., 1997) Süzer, Ş.; Özden, N.; Akaltan, F.; Akovali, G.
Resin samples prepared by compression molding using a poly (methyl methacrylate) (PMMA) denture base material were exposed to radio-frequency (rf) glow discharges to improve the wettability of the material. Fourier transform infrared (FT-IR) reflectance, X-ray photoelectron spectroscopy (XPS), and contact-angle measurements have been employed to characterize the changes introduced by the glow discharge plasma. FT-IR measurements cannot detect any modification. XPS reveals an increase in the O/C atomic ratio. Contact angles of the plasma-treated samples are always lower when compared with untreated ones. The increased O atomic concentration is attributed to formation of -COH groups on the surface during plasma treatment. The O/C atomic ratio decreases upon heating the samples in vacuum to 100 °C for 1-2 min and exposing the samples to liquid CH2Cl2 for 1-2 min. Exposure to distilled water for prolonged periods causes a slight decrease during the initial 1-20 days but levels off to a constant value up to a period of 60 days. Plasma treatment seems to offer a durable increase in the wettability for these materials left in air or distilled water.
Open Access
Growth of vertically aligned carbon nanotubes over self-ordered nano-porous alumina films and their surface properties
(Elsevier, 2012) Rana, K.; Kucukayan-Dogu, G.; Bengu, E.
Nanoporous anodic aluminum oxide (AAO) with self-organized arrays of uniform nanopores have been used for various applications in the fields of sensing, storage, separation and template-based fabrication of metal nanowires, carbon nanotubes, oxides and polymers. The work presented here involves the production and use of AAO templates for growth of aligned multi walled carbon nanotube arrays. AAO templates were formed by electrochemical oxidation of aluminum in different electrolyte solutions containing sulfuric, oxalic and phosphoric acid. SEM was used for the analysis of the surface morphology of the AAO films. The porous structures with pore size in the range of 25–120 nm were observed. Pore sizes were correlated with the type of acidic solutions used as the electrolyte. Finally, AAO surfaces have been used as substrates for the growth of vertically aligned carbon nanotubes through chemical vapor deposition technique, which showed super-hydrophobic behavior as confirmed by contact angle measurements.
Open Access
Impedimetric detection and lumped element modelling of a hemagglutination assay in microdroplets
(Royal Society of Chemistry, 2016) Marcali, M.; Elbuken, C.
Droplet-based microfluidic systems offer tremendous benefits for high throughput biochemical assays. Despite the wide use of electrical detection for microfluidic systems, application of impedimetric sensing for droplet systems is very limited. This is mainly due to the insulating oil-based continuous phase used for most aqueous samples of interest. We present modelling and experimental verification of impedimetric detection of hemagglutination in microdroplets. We have detected agglutinated red blood cells in microdroplets and screened whole blood samples for multiple antibody sera using conventional microelectrodes. We were able to form antibody and whole blood microdroplets in PDMS microchannels without any tedious chemical surface treatment. Following the injection of a blood sample into antibody droplets, we have detected the agglutination-positive and negative droplets in an automated manner. In order to understand the characteristics of impedimetric detection inside microdroplets, we have developed the lumped electrical circuit equivalent of an impedimetric droplet content detection system. The empirical lumped element values are in accordance with similar models developed for single phase electrical impedance spectroscopy systems. The presented approach is of interest for label-free, quantitative analysis of droplets. In addition, the standard electronic equipment used for detection allows miniaturized detection circuitries that can be integrated with a fluidic system for a quantitative microdroplet-based hemagglutination assay that is conventionally performed in well plates.
Open Access
In vitro biocompatibility of plasma-aided surface-modified 316L stainless steel for intracoronary stents
(Institute of Physics Publishing, 2010) Bayram, C.; Mizrak, A.K.; Aktürk, S.; Kurşaklioǧlu H.; Iyisoy, A.; Ifran, A.; Denkbaş, E.B.
316L-type stainless steel is a raw material mostly used for manufacturing metallic coronary stents. The purpose of this study was to examine the chemical, wettability, cytotoxic and haemocompatibility properties of 316L stainless steel stents which were modified by plasma polymerization. Six different polymeric compounds, polyethylene glycol, 2-hydroxyethyl methacrylate, ethylenediamine, acrylic acid, hexamethyldisilane and hexamethyldisiloxane, were used in a radio frequency glow discharge plasma polymerization system. As a model antiproliferative drug, mitomycin-C was chosen for covalent coupling onto the stent surface. Modified SS 316L stents were characterized by water contact angle measurements (goniometer) and x-ray photoelectron spectroscopy. C1s binding energies showed a good correlation with the literature. Haemocompatibility tests of coated SS 316L stents showed significant latency (t-test, p < 0.05) with respect to SS 316L and control groups in each test. © 2010 IOP Publishing Ltd.
Open Access
Oxygen plasma modification of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) film surfaces for tissue engineering purposes
(John Wiley & Sons, Inc., 2003) Hasirci, V.; Tezcaner, A.; Hasirci, N.; Süzer, Ş.
Plasma glow-discharge application is known as a technique to coat or modify the surfaces of various materials. In this study, the influence of oxygen rf-plasma treatment on surface and bulk properties of a biological polyester, poly(3-hydroxybutyrate-co-3-hydroxyvalerate), were studied by determining water content and water contact angle, and by using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The plasma-treated films absorbed more water than the untreated film, and the absorbance increased with the total power applied. The water contact angles decreased and O/C atomic ratio increased on treatment, indicating that the material became more hydrophilic due to increases in the oxygen-containing functional groups on the surface of the polymer. A direct relation could be observed when the O/C ratio was plotted against the total power applied (treatment duration x treatment power). SEM revealed a visual record of surface modification, the extent of which increased with increased total power. It was thus possible to alter the surface chemistry and relevant properties of the polymer film using oxygen plasma as a tool.
Open Access
Poly (hydroxyethyl methacrylate-glycidyl methacrylate) films modified with different functional groups: In vitro interactions with platelets and rat stem cells
(Elsevier, 2013) Bayramoglu, G.; Bitirim, V.; Tunali, Y.; Arica, M. Y.; Akcali, K. C.
Copolymerization of 2-hydroxyethylmethacrylate (HEMA) with glycidylmethacrylate (GMA) in the presence of α-α′- azoisobisbutyronitrile (AIBN) resulted in the formation of hydrogel films carrying reactive epoxy groups. Thirteen kinds of different molecules with pendant NH2 group were used for modifications of the p(HEMA-GMA) films. The NH2 group served as anchor binding site for immobilization of functional groups on the hydrogel film via direct epoxy ring opening reaction. The modified hydrogel films were characterized by FTIR, and contact angle studies. In addition, mechanical properties of the hydrogel films were studied, and modified hydrogel films showed improved mechanical properties compared with the non-modified film, but they are less elastic than the non-modified film. The biological activities of these films such as platelet adhesion, red blood cells hemolysis, and swelling behavior were studied. The effect of modified hydrogel films, including NH2, (using different aliphatic CH2 chain lengths) CH3, SO3H, aromatic groups with substituted OH and COOH groups, and amino acids were also investigated on the adhesion, morphology and survival of rat mesenchymal stem cells (MSCs). The MTT colorimetric assay reveals that the p(HEMA-GMA)-GA-AB, p(HEMA-GMA)-GA-Phe, p(HEMA-GMA)-GA-Trp, p(HEMA-GMA)-GA-Glu formulations have an excellent biocompatibility to promote the cell adhesion and growth. We anticipate that the fabricated p(HEMA-GMA) based hydrogel films with controllable surface chemistry and good stable swelling ratio may find extensive applications in future development of tissue engineering scaffold materials, and in various biotechnological areas. © 2012 Elsevier B.V.
Open Access
Preparation and characterization of poly(hydroxyethyl methacrylate-co-poly(ethyleneglycol-methacrylate)/hydroxypropyl-chitosan) hydrogel films: Adhesion of rat mesenchymal stem cells
(Hangug Gobunja Haghoi, 2010-12-02) Bayramoglu, G.; Akcalı, K. C.; Gultekin, S.; Bengu, E.; Arica, M. Y.
This study examined the effects of the surface properties of the materials, such as the hydroxyl, methyl and amino groups, on rat bone marrow derived Mesenchymal Stem Cell (MSC) seeding. A series of hydrogels were prepared in film form using 2-hydroxyethyl methacrylate (pHEMA), poly(ethyleneglycol) methacrylate (PEG-MA), and/or hydroxypropyl-chitosan (HPC). The physicochemical properties of these hydrogel films, such as water content, functional groups, contact angle, surface energy and thermal properties were affected by the composition of the materials. The ability of the MSCs to form colonies, as well as their viability on these materials were also analyzed. The water content of the hydrogel films increased with increasing PEG-MA and HPC ratio in the hydrogel. Contact angle measurements of the surface of the hydrogel films demonstrated that all the materials gave rise to a significantly hydrophilic surface compared to pure pHEMA. The blood protein interactions and platelet adhesion were reduced significantly on the surface of the materials upon the incorporation of PEG-MA compared to the control pure pHEMA and vice versa for HPC. The ability of the MSCs to adhere and form colonies on these materials was also analyzed. The results showed that these materials are suitable candidates to isolate and expand MSCs.
Open Access
Rapid and alternative fabrication method for microfluidic paper based analytical devices
(Elsevier B.V., 2016) Malekghasemi, S.; Kahveci, E.; Duman, M.
A major application of microfluidic paper-based analytical devices (µPADs) includes the field of point-of-care (POC) diagnostics. It is important for POC diagnostics to possess properties such as ease-of-use and low cost. However, µPADs need multiple instruments and fabrication steps. In this study, two different chemicals (Hexamethyldisilazane and Tetra-ethylorthosilicate) were used, and three different methods (heating, plasma treatment, and microwave irradiation) were compared to develop µPADs. Additionally, an inkjet-printing technique was used for generating a hydrophilic channel and printing certain chemical agents on different regions of a modified filter paper. A rapid and effective fabrication method to develop µPADs within 10 min was introduced using an inkjet-printing technique in conjunction with a microwave irradiation method. Environmental scanning electron microscope (ESEM) and x-ray photoelectron spectroscopy (XPS) were used for morphology characterization and determining the surface chemical compositions of the modified filter paper, respectively. Contact angle measurements were used to fulfill the hydrophobicity of the treated filter paper. The highest contact angle value (141°±1) was obtained using the microwave irradiation method over a period of 7 min, when the filter paper was modified by TEOS. Furthermore, by using this method, the XPS results of TEOS-modified filter paper revealed Si2p (23%) and Si-O bounds (81.55%) indicating the presence of Si–O–Si bridges and Si(OEt) groups, respectively. The ESEM results revealed changes in the porous structures of the papers and decreases in the pore sizes. Washburn assay measurements tested the efficiency of the generated hydrophilic channels in which similar water penetration rates were observed in the TEOS-modified filter paper and unmodified (plain) filter paper. The validation of the developed µPADs was performed by utilizing the rapid urease test as a model test system. The detection limit of the developed µPADs was measured as 1 unit ml−1 urease enzyme in detection zones within a period of 3 min. The study findings suggested that a combination of microwave irradiation with inkjet-printing technique could improve the fabrication method of µPADs, enabling faster production of µPADs that are easy to use and cost-effective with long shelf lives.
Open Access
Selective adsorption of L1210 leukemia cells/human leukocytes on micropatterned surfaces prepared from polystyrene/polypropylene-polyethylene blends
(Elsevier, 2014) Atalay, N.; Unal, Hilal Unal; Erbil, H. Y.; Tekinay, Ayse Begum
The objective of this study is to prepare polymeric surfaces which will adsorb L1210 leukemia cells selectively more than that of healthy human leukocytes in order to develop new treatment options for people with leukemia. Chemically heterogeneous and micropatterned surfaces were formed on round glass slides by dip coating with accompanying phase-separation process where only commercial polymers were used. Surface properties were determined by using optical microscopy, 3D profilometry, SEM and measuring contact angles. Polymer, solvent/nonsolvent types, blend composition and temperature were found to be effective in controlling the dimensions of surface microislands. MTT tests were applied for cell viability performance of these surfaces. Polystyrene/polyethylene-polypropylene blend surfaces were found to show considerable positive selectivity to L1210 leukemia cells where L1210/healthy leukocytes adsorption ratio approached to 9-fold in vitro. Effects of wettability, surface free energy, microisland size geometry on the adsorption performances of L1210/leukocytes pairs are discussed.
Open Access
Surface-modified bacterial nanofibrillar PHB scaffolds for bladder tissue repair
(Taylor and Francis Ltd., 2016) Karahaliloǧlu, Z.; Demirbilek, M.; Şam, M.; Saǧlam, N.; Mizrak, A. K.; Denkbaş, E. B.
The aim of the study is in vitro investigation of the feasibility of surface-modified bacterial nanofibrous poly [(R)-3-hydroxybutyrate] (PHB) graft for bladder reconstruction. In this study, the surface of electrospun bacterial PHB was modified with PEG- or EDA via radio frequency glow discharge method. After plasma modification, contact angle of EDA-modified PHB scaffolds decreased from 110 ï¿½ 1.50 to 23 ï¿½ 0.5 degree. Interestingly, less calcium oxalate stone deposition was observed on modified PHB scaffolds compared to that of non-modified group. Results of this study show that surface-modified scaffolds not only inhibited calcium oxalate growth but also enhanced the uroepithelial cell viability and proliferation.
Open Access
XPS and water contact angle measurements on aged and corona-treated PP
(John Wiley & Sons, Inc., 1999) Süzer, S.; Argun, A.; Vatansever, O.; Aral, O.
Effects of corona treatment and aging on commercially produced corona discharged polypropylene (PP) films were followed via surface sensitive roughness analysis by atomic force microscopy (AFM), water contact angle (WCA), and X-ray photoelectron spectroscopic (XPS) measurements. Roughness analysis by AFM gave similar results for both untreated and corona-treated samples. The measured water contact angle decreased after corona treatment but increased with aging. XPS findings revealed that corona treatment caused an increase in the O-containing species on the surface of the films, but the measured O/C atomic ratio decreased with aging. The angle dependence of the observed XPS O/C atomic ratio further revealed that surface modifications by the corona treatment were buried into the polymer away from the surface as a function of aging. This is attributed to a surface rearrangement of the macromolecules in agreement with the findings of Garbassi et al. on oxygen-plasma-treated polypropylene.