Radiation impedance of an array of circular capacitive micromachined ultrasonic transducers in collapsed state
IEEE International Ultrasonics Symposium, IUS 2011
1020 - 1023
Item Usage Stats
MetadataShow full item record
Radiation impedance is one of the important parameters in designing efficient and wideband capacitive micro-machined ultrasonic transducer (CMUT) arrays. It determines how much acoustical power is generated in the surrounding medium given the membrane motion. Recently, considerable effort has been put to characterize the radiation impedance of CMUT arrays in conventional uncollapsed regime. However, the radiation impedance of an array of CMUT cells in collapsed state has not yet been investigated. To calculate the array radiation impedance in collapse mode, we first calculate the radiation impedance of a single cell CMUT. For the array case, the mutual impedances between the neighboring cells must also be taken into account.We consider an array of 7, 19, 37, and 61 cells placed in a hexagonal pattern and try to determine the radiation impedance for different degrees of collapse. We find that in the collapsed case the peak radiation resistance value is reached at higher kd values, where k is the wavenumber and d is the center to center cell spacing, compared to the uncollapsed regime.
Capacitive micromachined ultrasonic transducer
Micro-machined ultrasonic transducer
Published Version (Please cite this version)http://dx.doi.org/10.1109/ULTSYM.2011.0250
Showing items related by title, author, creator and subject.
Olcum, Selim; Oǧuz, Kaan; Şenlik, Muhammed N.; Yamaner F. Y.; Bozkurt, A.; Atalar, Abdullah; Köymen, Hayrettin (IEEE, 2009-09)In this work we have designed, fabricated and tested CMUTs as underwater transducers. Single CMUT membranes with three different radii and 380 microns of thickness are fabricated for the demonstration of an underwater CMUT ...
Ölçüm, Selim; Atalar, Abdullah; Köymen, Hayrettin; Oğuz, Kağan; Şenlik, Muhammed N. (IEEE, 2007)In this paper, capacitive micromachined ultrasonic transducers are fabricated using a sacrificial surface micromachining process. A testing procedure has been established in order to measure the absolute transmit and receive ...
Ladabaum, I.; Jin, X.; Soh, H. T.; Pierre, F.; Atalar, Abdullah; Khuri-Yakub, B. T. (IEEE, 1996-11)The successful fabrication of ultrasonic immersion transducers is reported. Transducers are observed to operate from 1 MHz to 20 MHz in water, with the frequency range limited by electronics, not the transducers. Transmission ...