Browsing by Keywords "Finite element method"
Now showing items 1-20 of 48
-
3D modeling of on-chip acoustophoretic particle manipulation in a polymer microfluidic device
(Chemical and Biological Microsystems Society, 2016)This study focuses on understanding of the sensitivities of the acoustophoretic process on uncertainties/errors in the geometric properties of the chip material and the piezoelectric actuators. The sensitivity of the ... -
Algebraic reconstraction for 3D magnetic resonance-electrical impedance tomography (MREIT) using one component of magnetic flux density
(Institute of Physics and Engineering in Medicine, 2004)Magnetic resonance-electrical impedance tomography (MREIT) algorithms fall into two categories: those utilizing internal current density and those utilizing only one component of measured magnetic flux density. The latter ... -
Analysis of the 2D nonconcentric large reflector antenna-in-radome system: H-polarization case
(IEEE, 2004)2D nonconcentric reflector antenna-in-radome system is analyzed for H-polarization case. Rigorous formulation is performed depending on the MoR, Green's function and CSP methods. Larger geometries are solved in reasonable ... -
Analytic modeling of loss and cross-coupling in capacitive micromachined ultrasonic transducers
(IEEE, Piscataway, NJ, United States, 1998)The structural loss mechanism of capacitive micromachined ultrasonic transducer (cMUT) is investigated using finite element analysis and the normal mode theory. A single micromachined transducer membrane on an infinite ... -
BaTiO3 based photonic time crystal and momentum stop band
(Taylor & Francis, 2020-04)Temporally periodic photonic crystals develop an ω-k dispersion relation with momentum band gaps. While conventional photonic crystals induce forbidden bands in the frequency spectrum of photons, photonic time crystals ... -
Circuit theoretical method for efficient finite element analysis of acoustical problems
(IEEE, 1998)In the last decade, there has been an outstanding improvement in the computer aided design tools for VLSI circuits regarding solution times and the circuit complexity. This study proposes formulating the acoustic field ... -
Coherent energetic interfaces accounting for in-plane degradation
(Springer Netherlands, 2016)Interfaces can play a dominant role in the overall response of a body. The importance of interfaces is particularly appreciated at small length scales due to large area to volume ratios. From the mechanical point of view, ... -
Comparative evaluation of absorbing boundary conditions using Green's functions for layered media
(IEEE, 1995)Absorbing boundary conditions are comparatively studied using the Green's functions of the vector and scalar potentials for multilayer geometries and general sources. The absorbing boundaries are introduced as additional ... -
Coupled thermally general imperfect and mechanically coherent energetic interfaces subject to in-plane degradation
(Mathematical Sciences Publishers, 2017)To date, the effects of interface in-plane damage on the thermomechanical response of a thermally general imperfect (GI) and mechanically coherent energetic interface are not taken into account. A thermally GI interface ... -
Deep-collapse operation of capacitive micromachined ultrasonic transducers
(IEEE, 2011)Capacitive micromachined ultrasonic transducers (CMUTs) have been introduced as a promising technology for ultrasound imaging and therapeutic ultrasound applications which require high transmitted pressures for increased ... -
The design of a wideband and widebeam piston transducer in a finite closed circular baffle
(2008-06-07)The design of a high power piezoelectric underwater transducer operating at frequency range 40 kHz-80 kHz with acoustic power capability in excess of 250W is described. The transducer consists of two back-toback elements. ... -
Design of dual-frequency probe-fed microstrip antennas with genetic optimization algorithm
(IEEE, 2003)Dual-frequency operation of antennas has become a necessity for many applications in recent wireless communication systems, such as GPS, GSM services operating at two different frequency bands, and services of PCS and ... -
Electrical impedance tomography of translationally uniform cylindrical objects with general cross-sectional boundaries
(Institute of Electrical and Electronics Engineers, 1990)An algorithm is developed for electrical impedance tomography (EIT) of finite cylinders with general cross-sectional boundaries and translationally uniform conductivity distributions. The electrodes for data collection are ... -
An equivalent circuit for collapse operation mode of CMUTs
(IEEE, 2010)Collapse mode of operation of the capacitive mi-cromachined ultrasonic transducers (CMUTs) was shown to be a very effective way for achieving high output pressures. However, no accurate model exists for understanding the ... -
Equivalent circuit-based analysis of CMUT cell dynamics in arrays
(IEEE, 2013)Capacitive micromachined ultrasonic transducers (CMUTs) are usually composed of large arrays of closely packed cells. In this work, we use an equivalent circuit model to analyze CMUT arrays with multiple cells. We study ... -
Experimental and finite element analysis of EDM process and investigation of material removal rate by response surface methodology
(2013)In this study, thermal modeling and finite element simulation of electrical discharge machining (EDM) has been done, taking into account several important aspects such as temperature-dependent material properties, shape ... -
Ferroelectric based fractal phononic crystals: wave propagation and band structure
(Taylor & Francis, 2020-04)In this study, the band structure and transmission in multiferroic based Sierpinski carpet phononic crystal are investigated based on finite element simulation. In order to obtain the band structure of the phononic crystal ... -
Ferroelectric based microgyroscope for inertial measurement unit: Modeling and simulation
(IEEE, 2012)This paper present the design and modeling of the micro-electromechanical systems (MEMS) on the ternary ferroelectric compounds (PZT and Ba xSr 1-xTiO 3) based by using finite element model (FEM) simulation. © 2012 IEEE. -
Finite element modeling of micro-particle separation using ultrasonic standing waves
(ASME, 2014)Acoustophoresis which means separation of particles and cells using acoustic waves is becoming an intensive research subject. The method is based on inducing an ultrasonic compression standing wave inside a microchannel. ... -
Fracture of femoral neck: Analysis of new implant models with a slit and without a slit by the finite element method
(WHO Office in Azerbaijan, 2017)During fractures of the neck of the femur (PBHB) for the completion of postoperative fusion, there is a need for stable fixation - interfragmental immobility. The stability of used implants in a living person is difficult ...